eqptProtGroupType
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.5.2.1.2
Object
column
mandatory
r/w
Enumeration
This attributes distinguishes between 1+1 and 1:N protection groups.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.5.2.1.2- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptProtGroupEntry
- Table
- eqptProtGroupTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | one-plus-one |
2 | one-for-N |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptProtGroupId mandatory A unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.
ALCATEL NOTE:
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.1 |
| eqptProtGroupOperProtElement mandatory Only supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.10 |
| eqptProtGroupRowStatus mandatory Entries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.637.61.1.23.5.2.1.11 |
| eqptProtGroupNumberOfChanges mandatory Wrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProt… | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.3 |
| eqptProtGroupSwitchoverCount mandatory Wrap around counter for the number of switchovers being performed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 … | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.4 |
| eqptProtGroupLastSwitchoverReason mandatory This object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: - | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.5 |
| eqptProtGroupEpsQuenchfactor mandatory This object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mec… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.637.61.1.23.5.2.1.6 |
| eqptProtGroupAlarmBitmap mandatory Status bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.7 |
| eqptProtGroupAdminStatus mandatory Used by the administrator to disable or enable protection within
that protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.8 |
| eqptProtGroupAdminProtElement mandatory Only supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means tha… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.9 |