eqptProtGroupRowStatus
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.5.2.1.11
Object
Entries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry is made active(1). For LT protection group, if the group
is in service then the entry is made active(1). If the group
is not in service then the entry is made notInService(2).
If the object is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.5.2.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptProtGroupEntry
- Table
- eqptProtGroupTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptProtGroupId mandatory A unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.
ALCATEL NOTE:
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.1 |
| eqptProtGroupOperProtElement mandatory Only supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.10 |
| eqptProtGroupType mandatory This attributes distinguishes between 1+1 and 1:N protection groups.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVA… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.2 |
| eqptProtGroupNumberOfChanges mandatory Wrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProt… | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.3 |
| eqptProtGroupSwitchoverCount mandatory Wrap around counter for the number of switchovers being performed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 … | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.4 |
| eqptProtGroupLastSwitchoverReason mandatory This object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: - | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.5 |
| eqptProtGroupEpsQuenchfactor mandatory This object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mec… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.637.61.1.23.5.2.1.6 |
| eqptProtGroupAlarmBitmap mandatory Status bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.7 |
| eqptProtGroupAdminStatus mandatory Used by the administrator to disable or enable protection within
that protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.8 |
| eqptProtGroupAdminProtElement mandatory Only supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means tha… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.9 |