eqptProtGroupEpsQuenchfactor
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.5.2.1.6
Object
This object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mechanism is disabled.
Configuration of the EPS quenchfactor has mainly be foreseen for
test purposes. Operators should preferably not be able to
reconfigure the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 seconds
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.5.2.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptProtGroupEntry
- Table
- eqptProtGroupTable
- Siblings
- 10
Syntax
RFC1155-SMITimeTicks
- Source
- RFC1155-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptProtGroupId mandatory A unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.
ALCATEL NOTE:
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.1 |
| eqptProtGroupOperProtElement mandatory Only supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.10 |
| eqptProtGroupRowStatus mandatory Entries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.637.61.1.23.5.2.1.11 |
| eqptProtGroupType mandatory This attributes distinguishes between 1+1 and 1:N protection groups.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVA… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.2 |
| eqptProtGroupNumberOfChanges mandatory Wrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProt… | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.3 |
| eqptProtGroupSwitchoverCount mandatory Wrap around counter for the number of switchovers being performed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 … | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.5.2.1.4 |
| eqptProtGroupLastSwitchoverReason mandatory This object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: - | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.5 |
| eqptProtGroupAlarmBitmap mandatory Status bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.7 |
| eqptProtGroupAdminStatus mandatory Used by the administrator to disable or enable protection within
that protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.5.2.1.8 |
| eqptProtGroupAdminProtElement mandatory Only supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means tha… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.5.2.1.9 |