eqptPortProtectionLastSwitchReason
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.15.1.7
Object
column
mandatory
Integer32
This attribute contains the reason for the last port
switchover (if any).
0 = No switch has occurred (since last LT startup).
1 = Manual switch due to port Admin State change.
2 = Manual switch due to usage of Switch command.
3 = Automatic switch due to system determination.
4 = Automatic switch due to LT failure.
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.15.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- eqptPortProtectionEntry
- Table
- eqptPortProtectionTable
- Siblings
- 7
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptPortProtectionPortId mandatory Each row is indexed by the IfIndex of the
primary port of the protection group, the one which
is protected.
Only PON ports can be selected. | column | ITF-MIBInterfaceIndex | .1.3.6.1.4.1.637.61.1.23.15.1.1 |
| eqptPortProtectionRowStatus mandatory All rows instantiated using 'create-and-go' to
mate 2 ports in a protection group. Set to 'destroy' to
eliminate the protection group.
RULE 1 - Cannot create a prot… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.637.61.1.23.15.1.2 |
| eqptPortProtectionPairedPortId mandatory This attribute represents the IfIndex of the paired
port. Only PON ports can be selected.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
… | column | ITF-MIBInterfaceIndex | .1.3.6.1.4.1.637.61.1.23.15.1.3 |
| eqptPortProtectionPortStatus mandatory This attribute represents the status of the primary port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.15.1.4 |
| eqptPortProtectionPairedPortStatus mandatory This attribute represents the status of the paired
port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the syst… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.15.1.5 |
| eqptPortProtectionSwitchCommand mandatory This attribute represents the IfIndex of the desired port
to switch over to.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex mus… | column | ITF-MIBInterfaceIndex | .1.3.6.1.4.1.637.61.1.23.15.1.6 |
| eqptPortProtectionNumberOfSwitchovers mandatory This attribute contains the number of switchovers since
last LT startup. | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.15.1.8 |