eqptHolderPlannedType
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.2.1.3
Object
A string representing the planned type of equipment holder.
If the equipment holder is planned, the string consists of a
mnemonic, identifying the holder type.
This object is only writable for the entries that represent a shelf.
Other entries get a value corresponding to the detected equipment
practice type.
Following values are valid:
System-types:
=============
LAUS Large ASAM US market (6 racks, 3 shelves per rack)
LAEU Large ASAM EU market (6 racks, 3 shelves per rack)
LEEU Large ESAM EU market (7 racks, 4 shelves per rack)
LEUS Large ESAM US market (7 racks, 4 shelves per rack)
LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves
per rack)
LEWW Large ESAM World Wide (7 racks, 4 shelves per rack)
LNWW Large ESAM World Wide (7 racks, 4 shelves per rack)
Rack-types:
===========
ALTR-A ADSL Line Termination Rack version A (US)
ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm)
Shelf-types:
============
<SHELF_MNEMONIC> A shelf of a specific type. Refer to the ETSI
Configurations and US Configurations documents
for the list of shelf types that are supported
in a given system release.
NOT_PLANNED The shelf is not planned.
NOT_ALLOWED Shelf planning is not allowed in this position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.2.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptHolderEntry
- Table
- eqptHolderTable
- Siblings
- 14
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptHolderId mandatory Index in equipment holder Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - | column | EqptHolderIndex | .1.3.6.1.4.1.637.61.1.23.2.1.1 |
| eqptHolderContainerId mandatory This attribute describes in which equipment holder the equipment
holder is contained.
This object is only meaningful for racks and shelves, since the
system itself has no containi… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.2.1.10 |
| eqptHolderContainerOffset mandatory This attribute describes the position of the equipment holder
in the containing equipment holder.
This object is only meaningful for racks and shelves, since the
system itself has… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.2.1.11 |
| eqptHolderMode mandatory This attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can onl… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.12 |
| eqptHolderSerialNumber mandatory This attribute represents the serial number of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.13 |
| eqptHolderVariant mandatory This attribute represents the ALU code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPP… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.14 |
| eqptHolderICScode mandatory This attribute represents the Item Change Status iteration
code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.15 |
| eqptHolderClass mandatory Classification of shelves. This object has no meaning for the
system and the rack equipment holders.
Note: for ISAM, only the values mainEthernet (4) and extEtherne… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.2 |
| eqptHolderActualType mandatory A string representing the actual equipment holder type.
Following values are possible:
<HOLDER_MNEMONIC> Indicates the detected equipment holder-type… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.4 |
| eqptHolderAdminStatus mandatory Used by the administrator to lock or unlock an equipment holder.
This attribute is only supported for shelves.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.5 |
| eqptHolderOperStatus mandatory This attribute identifies whether or not the equipment holder is
capable of performing its normal functions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.6 |
| eqptHolderOperError mandatory This attribute describes for what reason the equipment holder is
not operational. These values correspond with the alarms that are
generated in case of a failure.
A… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.7 |
| eqptHolderAvailStatus mandatory This attribute indicates whether the equipment holder is
available or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
PERSIST: NO DEFVAL… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.8 |
| eqptHolderDescription mandatory Text-field, which can for instance be used to describe the
location of the equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PER… | column | OctetString | .1.3.6.1.4.1.637.61.1.23.2.1.9 |