eqptHolderMode
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.2.1.12
Object
column
mandatory
r/w
Enumeration
This attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
also supported.
ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
LT slot. So, two more LSM can be supported in this mode. Therefore,
NTIO/NTB board is not supported.
ntb-unsupported: In this mode, NTB slot can be used as LT slot.
So one more LT can be supported in this mode. Therefore, NTB board will
not be supported. This mode is applicable for NFXS-B shelf only.
ntio-unsupported: In this mode, there is no NTIO; the slot can be
used for an LSM.
DEFAULTVALUE: The default Value of the eqptHolderMode depends
on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
All other shelves will default to ntbntio-supported mode.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: Yes DEFVALUE: See above UNITS: -
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.2.1.12- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptHolderEntry
- Table
- eqptHolderTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ntbntio-supported |
2 | ntbntio-unsupported |
3 | ntb-unsupported |
4 | ntbntioextlt-unsupported |
6 | ntio-unsupported |
7 | ngpon-supported |
8 | gpon-supported |
9 | ngpon-port-reduced |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptHolderId mandatory Index in equipment holder Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - | column | EqptHolderIndex | .1.3.6.1.4.1.637.61.1.23.2.1.1 |
| eqptHolderContainerId mandatory This attribute describes in which equipment holder the equipment
holder is contained.
This object is only meaningful for racks and shelves, since the
system itself has no containi… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.2.1.10 |
| eqptHolderContainerOffset mandatory This attribute describes the position of the equipment holder
in the containing equipment holder.
This object is only meaningful for racks and shelves, since the
system itself has… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.2.1.11 |
| eqptHolderSerialNumber mandatory This attribute represents the serial number of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.13 |
| eqptHolderVariant mandatory This attribute represents the ALU code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPP… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.14 |
| eqptHolderICScode mandatory This attribute represents the Item Change Status iteration
code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.15 |
| eqptHolderClass mandatory Classification of shelves. This object has no meaning for the
system and the rack equipment holders.
Note: for ISAM, only the values mainEthernet (4) and extEtherne… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.2 |
| eqptHolderPlannedType mandatory A string representing the planned type of equipment holder.
If the equipment holder is planned, the string consists of a
mnemonic, identifying the holder type.
This object is only… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.3 |
| eqptHolderActualType mandatory A string representing the actual equipment holder type.
Following values are possible:
<HOLDER_MNEMONIC> Indicates the detected equipment holder-type… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.2.1.4 |
| eqptHolderAdminStatus mandatory Used by the administrator to lock or unlock an equipment holder.
This attribute is only supported for shelves.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.5 |
| eqptHolderOperStatus mandatory This attribute identifies whether or not the equipment holder is
capable of performing its normal functions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.6 |
| eqptHolderOperError mandatory This attribute describes for what reason the equipment holder is
not operational. These values correspond with the alarms that are
generated in case of a failure.
A… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.7 |
| eqptHolderAvailStatus mandatory This attribute indicates whether the equipment holder is
available or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
PERSIST: NO DEFVAL… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.2.1.8 |
| eqptHolderDescription mandatory Text-field, which can for instance be used to describe the
location of the equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PER… | column | OctetString | .1.3.6.1.4.1.637.61.1.23.2.1.9 |