eqptBoardDualHostLsmLocation
ASAM-EQUIP-MIB ·
.1.3.6.1.4.1.637.61.1.23.3.1.30
Object
column
mandatory
r/w
EqptHolderIndexOrZero
Only applicable for FD REM connected to dual host.
It is the Rack/Shelf identifying the location of this
externally managed slot, within the scope of the host connecting
the Lsm. The slot component is implicitly present in the key.
It is instantiated with default value and can only be set when
the planned type is EXT_MANAGED. The type corresponds to the
type EqptHolderIndex, except for the fact that this field can
be 0, which is the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -
Context
- MIB
- ASAM-EQUIP-MIB
- OID
.1.3.6.1.4.1.637.61.1.23.3.1.30- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eqptBoardEntry
- Table
- eqptBoardTable
- Siblings
- 31
Syntax
EqptHolderIndexOrZero
- Source
- EqptHolderIndexOrZero
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqptSlotId mandatory A unique value to identify a slot position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: - | column | EqptSlotIndex | .1.3.6.1.4.1.637.61.1.23.3.1.1 |
| eqptBoardSwOverruleStatus mandatory Used to overrule the default software version for this board.
This attribute is only supported for managed LSMs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RAN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.10 |
| eqptBoardContainerId mandatory This attribute describes in which equipment holder the slot
is contained.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: … | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.3.1.11 |
| eqptBoardContainerOffset mandatory This attribute describes the position of the slot in the
containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO … | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.3.1.12 |
| eqptBoardInventoryAlcatelCompanyId mandatory This attribute represents the company of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.13 |
| eqptBoardInventoryTypeName mandatory This attribute represents the name of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.14 |
| eqptBoardInventoryPBACode mandatory This attribute represents the Alcatel Printed Board Assembly
code of of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO D… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.15 |
| eqptBoardInventoryFPBACode mandatory This attribute represents the Alcatel Printed Board Assembly
code of the board, which also identifies the boot software.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.16 |
| eqptBoardInventoryICScode mandatory This attribute represents the Item Change Status iteration
code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVAL… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.17 |
| eqptBoardInventoryCLEICode mandatory This attribute represents the (USA) Common Language Equipment
Identification code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PE… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.18 |
| eqptBoardInventorySerialNumber mandatory This attribute represents the serial number of the board.
Breakdown of a sample serial number is :
sample NANT-D serial number is AA1003ZA028
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.19 |
| eqptSlotPlannedType mandatory A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is planned in the slot. If the board is planned, the string consists
of a mnemonic that identifies the bo… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.2 |
| eqptBoardInventoryLastFailedTest mandatory Identifies the last failing test by means of 4 numbers, from MSB
to LSB:
- Table number (1 byte)
- Segment number (1 byte)
- Case number (1 byte)
- Check number (1 byt… | column | OctetString | .1.3.6.1.4.1.637.61.1.23.3.1.20 |
| eqptSlotPlannedCapabilityProfile mandatory A pointer to the capability profile that will be used for this
slot. Capability profiles are only applicable for LT cards
that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTI… | column | ASAM-TC-MIBAsamProfilePointer | .1.3.6.1.4.1.637.61.1.23.3.1.22 |
| eqptBoardCustAlarmProfile mandatory A pointer to the customizable alarms profile which will be
associated to NT for all shelves except FD-REM where the
customizable alarms profile will be associated to master LT.
In… | column | ASAM-TC-MIBAsamProfilePointer | .1.3.6.1.4.1.637.61.1.23.3.1.23 |
| eqptBoardLastRestartCause mandatory This attribute gives the last restart cause for board.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.24 |
| eqptBoardLastRestartTime mandatory This attribute gives the last restart time.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOT… | column | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.23.3.1.25 |
| eqptBoardRestartNumberOfChanges mandatory Wrap around counter which indicates the number of restart times.
This counter is incremented each time eqptBoardLastRestartTime
changes. Considering future safe, only use default … | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.3.1.26 |
| eqptBoardRelatedMgntEntityIPAddress mandatory Network address. It is a public OAM IP address related to xVPS. For
single OAM IP is introduced, multi-xVPS boards existing on a same shelf
may use one single OAM IP. This I… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.637.61.1.23.3.1.27 |
| eqptBoardRelatedMgntEntityPairedNumber mandatory For single OAM IP is introduced, one public OAM IP can not identify an
xVPS, so community string is introduced. Each active xVPS will have
different community string in one shelf.… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.3.1.28 |
| eqptBoardDualHostIPAddress mandatory Network address. Only applicable for FD REM connected to dual host.
It is the public OAM IP address of the host connecting the Lsm in this
externally managed slot. It is instantia… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.637.61.1.23.3.1.29 |
| eqptSlotActualType mandatory A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is actually present in the slot.
Following values are possible:
<BOARD_MNEMO… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.23.3.1.3 |
| eqptBoardIfSlotId mandatory This object gives the slot's linear number, which could be
used by an external manager to help in mapping a given
IfIndex to a physical slot location. It is a numerical value
that… | column | Integer32 | .1.3.6.1.4.1.637.61.1.23.3.1.32 |
| eqptBoardRestartCountPerLt mandatory Wrap around counter which indicates the number of restart times per LT.
This counter is incremented each time eqptBoardLastRestartTime
changes.This counter will reset to zero when… | column | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.23.3.1.33 |
| eqptBoardClearRestartCountPerLt mandatory This object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.637.61.1.23.3.1.34 |
| eqptSlotPowerStatus mandatory This attribute is used by the operator to power-up or power-down
an LSM slot. This attribute is not supported for other type of slots.
ALCATEL NOTE:
SUPPORT: YES… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.4 |
| eqptBoardAdminStatus mandatory This attribute is used by the operator to lock or unlock the board.
This attribute is only supported for the following type of boards:
NT (but notice that the syste… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.5 |
| eqptBoardOperStatus mandatory This attribute informs the operator whether the plug-in unit is able
to perform its normal operation.
This attribute is supported for all type of boards: NT, EXT, L… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.6 |
| eqptBoardOperError mandatory This attribute describes for what reason the board is not operational.
These values correspond with the alarms which are generated in case of
a failure.
This attrib… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.7 |
| eqptBoardAvailStatus mandatory This attribute provides further information regarding the state
of the board. It is set to available after a successfull selftest
of the board (if applicable).
This… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.8 |
| eqptBoardRestart mandatory Writing a valid value to this object will restart the board in the
specified mode.
This attribute is only supported for the following type of boards:
NT, EXT, manag… | column | Enumeration | .1.3.6.1.4.1.637.61.1.23.3.1.9 |