asamAlarmLogSeverityLevel
ASAM-ALARM-MIB ·
.1.3.6.1.4.1.637.61.1.3.11
Object
scalar
mandatory
r/w
AsamAlarmSeverityType
This object defines the lowest severity level an alarm must have in
order to be logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1-5
PERSIST: YES DEFVALUE: indeterminate UNITS: -
Context
- MIB
- ASAM-ALARM-MIB
- OID
.1.3.6.1.4.1.637.61.1.3.11- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- asamAlarmMIB
- Siblings
- 67
Syntax
AsamAlarmSeverityType
- Source
- AsamAlarmSeverityType
- Base type
Enumeration
Values & Constraints
Type Values
0 | alllevel |
1 | indeterminate |
2 | warning |
3 | minor |
4 | major |
5 | critical |
6 | ignore |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| asamAlarmTable mandatory This table defines all the possible alarms at the agent.
For each alarm, there is an entry. Each entry consists of an index
for the table, alarm id, alarm category, alarm On/Off t… | table | - | .1.3.6.1.4.1.637.61.1.3.1 |
| asamAlarmLogResetTime mandatory Time value in seconds when the alarm log was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.10 |
| asamAlarmLogBufferSize mandatory This object gives the size of the internal log buffer. This is
useful information when an overflow of the log buffer occurs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: N… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.12 |
| asamAlarmLogFullAction mandatory This object defines the action to be taken when the alarm log buffer
is completely full. If set to Wrap, then older log records are
overwritten by recent ones. If it is set to H… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.3.13 |
| asamAlarmLogOverflowed mandatory This object indicates whether the log table is overflowed or not.
When the log buffer is reset, this object is set to Notoverflowed.
This object is not useful when FullAction is s… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.3.14 |
| asamAlarmLogTable mandatory This table is used to log all alarm changes of alarms with a log
status set to active and a severity level equal or higher than the
configured logging severity. The entries are or… | table | - | .1.3.6.1.4.1.637.61.1.3.15 |
| asamAlarmSnapshotTableStatus mandatory Before reading the snapshot table, one must try to set this object
to inUse first. When it is already in this state, the set will fail;
when in the notInUse state, the set will su… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.3.16 |
| asamAlarmSnapshotOwner mandatory This string can contain an identification of the owner who took the
snapshot. When a manager wants to use the snapshot table, he can set
this string with a meaningful value. When … | scalar | OctetString | .1.3.6.1.4.1.637.61.1.3.17 |
| asamAlarmSnapshotTimeout mandatory This object gives the timeout in msec on the snapshot table.
The timer is started from the moment the snapshot table status is
set to inUse. It will be set to a default value and … | scalar | RFC1155-SMITimeTicks | .1.3.6.1.4.1.637.61.1.3.18 |
| asamAlarmSnapshotSeverityLevel mandatory This object indicates the lowest severity level of alarms that
should be visible in the snapshot table. When the snapshot table
status is in the notInUse state, the severity canno… | scalar | AsamAlarmSeverityType | .1.3.6.1.4.1.637.61.1.3.19 |
| asamAlarmChangeOccurredTrapEnable obsolete This object defines whether an internal trap should be sent to the
Trap MIB when a alarm changed that has a severity equal or higher
than the configured trap severity. | scalar | AsamAlarmModeType | .1.3.6.1.4.1.637.61.1.3.2 |
| asamNumberOfAlarmSnapshotEntries mandatory When the snapshot table status is in the inUse state, this object
reflects the number of entries in the snapshot table. If the snapshot
table status is set to notInUse, this objec… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.637.61.1.3.20 |
| asamAlarmSnapshotSeverityStatus mandatory If the snapshot table status is set to notInUse, this object
can not be read. If the snapshot table status is inUse, this object
indicates all the active severity levels of the al… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.21 |
| asamAlarmSnapshotTable mandatory This table is empty when the snapshot table status is set to
notInUse. When a snapshot is taken (see the description of the
snapshot table status object for a complete scenario), … | table | - | .1.3.6.1.4.1.637.61.1.3.22 |
| asamNumberOfTotalChanges mandatory This counter represents the total number of changes of all alarms
since startup. It is independent of the alarm severity level.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.23 |
| asamNumberOfIndeterminateChanges mandatory This counter represents the total number of changes of all alarms
with a severity level Indeterminate since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANG… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.24 |
| asamNumberOfWarningChanges mandatory This counter represents the total number of changes of all alarms
with a severity level Warning since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.25 |
| asamNumberOfMinorChanges mandatory This counter represents the total number of changes of all alarms
with a severity level Minor since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See a… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.26 |
| asamNumberOfMajorChanges mandatory This counter represents the total number of changes of all alarms
with a severity level Major since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See a… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.27 |
| asamNumberOfCriticalChanges mandatory This counter represents the total number of changes of all alarms
with a severity level Critical since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: Se… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.28 |
| asamNumberofAlarmChanges mandatory This object gives the number of changes that have occurred at
the CurrentAlarmtable since startup. It is a wrap around counter
between 0 and MAX.
ALCATEL NOTE:
SUPPO… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.3 |
| asamAlarmTrapNumberOfAlarmChanges obsolete This counter represents the number of alarm changes (of alarms with
a severity equal or higher than the configured trap severity) since
startup. It is a wraparound counter between… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.3.30 |
| asamAlarmTotalDeltaLogBufferSize mandatory This value indicates the maximum of distributed severity-specific
delta log entries. This means that :
asamAlarmIndeterminateDeltaLogBufferSize
+ asamAlarmWarningDeltaLogB… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.39 |
| asamNumberofAlarmEntries mandatory This object gives the number of entries in the Current Alarm Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNI… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.637.61.1.3.4 |
| asamAlarmIndeterminateDeltaLogLastEntry mandatory This object gives the index of the last entry that was added to the
Indeterminate delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PE… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.40 |
| asamAlarmIndeterminateDeltaLogReset mandatory This object is a button-like object to reset the Indeterminate
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When… | scalar | AsamAlarmLogResetType | .1.3.6.1.4.1.637.61.1.3.41 |
| asamAlarmIndeterminateDeltaLogResetTime mandatory Network time in seconds indicating when the Indeterminate Delta
Log Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO… | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.42 |
| asamAlarmIndeterminateDeltaLogBufferSize mandatory This object gives the size of the internal Indeterminate Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log T… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.43 |
| asamAlarmIndeterminateDeltaLogFullAction mandatory This object defines the action to be taken when the Indeterminate
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it … | scalar | AsamAlarmLogFullActionType | .1.3.6.1.4.1.637.61.1.3.44 |
| asamAlarmIndeterminateDeltaLogOverflowed mandatory This object indicates whether the Indeterminate delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not m… | scalar | AsamAlarmLogOverflowType | .1.3.6.1.4.1.637.61.1.3.45 |
| asamAlarmIndeterminateDeltaLogTable mandatory This table is to log all reported alarms with a severity equal to
Indeterminate. The Logged records are ordered by time.
The latest Indeterminate reported alarm change is logged a… | table | - | .1.3.6.1.4.1.637.61.1.3.46 |
| asamAlarmWarningDeltaLogLastEntry mandatory This object gives the index of the last entry that was added to the
Warning delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST:… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.47 |
| asamAlarmWarningDeltaLogReset mandatory This object is a button-like object to reset the Warning
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the r… | scalar | AsamAlarmLogResetType | .1.3.6.1.4.1.637.61.1.3.48 |
| asamAlarmWarningDeltaLogResetTime mandatory Network time in seconds indicating when the Warning Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DE… | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.49 |
| asamCurrentAlarmSeverityStatus mandatory This object indicating all active severities in the current alarm
table (equal or higher than the configured severity level). They are
represented as a bitmap with the following b… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.5 |
| asamAlarmWarningDeltaLogBufferSize mandatory This object gives the size of the internal Warning Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
b… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.50 |
| asamAlarmWarningDeltaLogFullAction mandatory This object defines the action to be taken when the Warning
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set… | scalar | AsamAlarmLogFullActionType | .1.3.6.1.4.1.637.61.1.3.51 |
| asamAlarmWarningDeltaLogOverflowed mandatory This object indicates whether the Warning delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaning… | scalar | AsamAlarmLogOverflowType | .1.3.6.1.4.1.637.61.1.3.52 |
| asamAlarmWarningDeltaLogTable mandatory This table is to log all reported alarms with a severity equal to
Warning. The Logged records are ordered by time.
The latest Warning reported alarm change is logged as the last
e… | table | - | .1.3.6.1.4.1.637.61.1.3.53 |
| asamAlarmMinorDeltaLogLastEntry mandatory This object gives the index of the last entry that was added
to the Minor delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: N… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.54 |
| asamAlarmMinorDeltaLogReset mandatory This object is a button-like object to reset the Minor
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the res… | scalar | AsamAlarmLogResetType | .1.3.6.1.4.1.637.61.1.3.55 |
| asamAlarmMinorDeltaLogResetTime mandatory Network time in seconds indicating when the Minor Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFV… | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.56 |
| asamAlarmMinorDeltaLogBufferSize mandatory This object gives the size of the internal Minor Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buf… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.57 |
| asamAlarmMinorDeltaLogFullAction mandatory This object defines the action to be taken when the Minor
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set t… | scalar | AsamAlarmLogFullActionType | .1.3.6.1.4.1.637.61.1.3.58 |
| asamAlarmMinorDeltaLogOverflowed mandatory This object indicates whether the Minor delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningfu… | scalar | AsamAlarmLogOverflowType | .1.3.6.1.4.1.637.61.1.3.59 |
| asamAlarmMinorDeltaLogTable mandatory This table is to log all reported alarms with a severity equal to
Minor. The Logged records are ordered by time.
The latest Minor reported alarm change is logged as the last
entry… | table | - | .1.3.6.1.4.1.637.61.1.3.60 |
| asamAlarmMajorDeltaLogLastEntry mandatory This object gives the index of the last entry that was added
to the Major delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: N… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.61 |
| asamAlarmMajorDeltaLogReset mandatory This object is a button-like object to reset the Major
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the res… | scalar | AsamAlarmLogResetType | .1.3.6.1.4.1.637.61.1.3.62 |
| asamAlarmMajorDeltaLogResetTime mandatory Network time in seconds indicating when the Major Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFV… | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.63 |
| asamAlarmMajorDeltaLogBufferSize mandatory This object gives the size of the internal Major Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buf… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.64 |
| asamAlarmMajorDeltaLogFullAction mandatory This object defines the action to be taken when the Major
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set t… | scalar | AsamAlarmLogFullActionType | .1.3.6.1.4.1.637.61.1.3.65 |
| asamAlarmMajorDeltaLogOverflowed mandatory This object indicates whether the Major delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningfu… | scalar | AsamAlarmLogOverflowType | .1.3.6.1.4.1.637.61.1.3.66 |
| asamAlarmMajorDeltaLogTable mandatory This table is to log all reported alarms with a severity equal to
Major. The Logged records are ordered by time.
The latest Major reported alarm change is logged as the last
entry… | table | - | .1.3.6.1.4.1.637.61.1.3.67 |
| asamAlarmCriticalDeltaLogLastEntry mandatory This object gives the index of the last entry that was added
to the Critical delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.68 |
| asamAlarmCriticalDeltaLogReset mandatory This object is a button-like object to reset the Critical
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the … | scalar | AsamAlarmLogResetType | .1.3.6.1.4.1.637.61.1.3.69 |
| asamCurrentAlarmTable mandatory This table contains the currently active alarms, ordered by severity
(highest first). Each entry contains information on the alarm type,
alarm status, two indexes and the last tim… | table | - | .1.3.6.1.4.1.637.61.1.3.7 |
| asamAlarmCriticalDeltaLogResetTime mandatory Network time in seconds indicating when the Critical Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO D… | scalar | ASAM-TC-MIBNetworkTimeInSeconds | .1.3.6.1.4.1.637.61.1.3.70 |
| asamAlarmCriticalDeltaLogBufferSize mandatory This object gives the size of the internal Critical Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.71 |
| asamAlarmCriticalDeltaLogFullAction mandatory This object defines the action to be taken when the Critical
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is se… | scalar | AsamAlarmLogFullActionType | .1.3.6.1.4.1.637.61.1.3.72 |
| asamAlarmCriticalDeltaLogOverflowed mandatory This object indicates whether the Critical delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meanin… | scalar | AsamAlarmLogOverflowType | .1.3.6.1.4.1.637.61.1.3.73 |
| asamAlarmCriticalDeltaLogTable mandatory This table is to log all reported alarms with a severity equal to
Critical. The Logged records are ordered by time.
The latest Critical reported alarm change is logged as the last… | table | - | .1.3.6.1.4.1.637.61.1.3.74 |
| asamAlarmNonItfReportingSeverity mandatory This objects specifies for all non interface related alarms
the minimal severity for the alarm to be reported.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1… | scalar | AsamAlarmSeverityType | .1.3.6.1.4.1.637.61.1.3.75 |
| asamAlarmFilterTable mandatory Static table, representing the alarm filters inside the ASAM.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above | table | - | .1.3.6.1.4.1.637.61.1.3.76 |
| asamAlarmReport | node | - | .1.3.6.1.4.1.637.61.1.3.77 |
| asamAlarmQueryTable mandatory This table is used to retrieve all the reported alarms by filters.
For each alarm, there is an entry. Each entry includes the detailed informations for this alarm.
ALCA… | table | - | .1.3.6.1.4.1.637.61.1.3.78 |
| asamAlarmLogLastEntry mandatory This object gives the index of the last entry that was added to the
log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALU… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.3.8 |
| asamAlarmLogReset mandatory This object is a button-like object to reset the alarm logging
table. When it is set to the Reset value, the log table is cleared,
and logging starts from index 1. When the rese… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.3.9 |