arubaWiredPoePethPsePortRpd

ARUBAWIRED-POE-MIB · .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3
MIB view Table view

Object

column Enumeration 
Rapid Power Down is executed by the hardware in the event of a power-supply
failure. It quickly cuts power to a PD to prevent an over-current scenario
in the PSE. This field indicates whether the interface will go down in the
event of any PSU failure or not. A value of on(2) indicates that a power
supply failure will cause the power delivery to be cut on supply failure.
A value of off(1) indicates that the port is unaffected by the failure of
any single PSU.The default value is off(1).

Context

MIB
ARUBAWIRED-POE-MIB
OID
.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3
Type
column
Access
readonly
Status
current
Parent
arubaWiredPoePethPsePortEntry
Table
arubaWiredPoePethPsePortTable
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
1off
2on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arubaWiredPoePethPsePortPowerAllocateBy
Allows control over the power allocation strategy used for this port. Two power allocation strategies are class(2) and usage(1). When allocating by usage(1) power is delivered as …
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1
arubaWiredPoePethPsePortOperStatus
This field specifies the operational status of the port.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.10
arubaWiredPoePethPsePortPdSignature
This Signature value represents the PD signature. This variable is valid only while a PD is detected. In 802.3af and 802.3at standards the power controller on the PSE uses two of …
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.11
arubaWiredPoePethPsePortPowerClassification
A read-only value that indicates the PD Class of a detected PD. Classification is a way to tag different terminals on the Power over LAN network according to their power consumpti…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.12
arubaWiredPoePethPsePortPseAssignedClass
This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD requested power and PSE…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13
arubaWiredPoePethPsePortPoECycle
This object is used for PoE port reset with timeout of 1-60s. PoE interface is disabled and then enabled with timeout as input.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.14
arubaWiredPoePethPsePortPreStdDetect
This field specifies the pre standard detect configuration for this port. A value of on - indicates that pre-802.3af-standard devices to power on. A value of off - indicates that …
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.2
arubaWiredPoePethPsePortCurrent
This field specifies the current supplied at this port. This value is specified in milliamperes(mA).
columnmilliamperes SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.4
arubaWiredPoePethPsePortVoltage
This field specifies the Voltage supplied at this port. This value is specified in 10's of Volts (dV).
columndeciVolts SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.5
arubaWiredPoePethPsePortReservedPower
This field specifies quantum of power which has been reserved for the PD at this port. This value is specified in milliwatts (mW).
columnmilliwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.6
arubaWiredPoePethPsePortPowerDrawn
This field specifies quantum of power which has indicating the actual power drawn by powered device(PD). This value is specified in milliwatts (mW).
columnmilliwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.7
arubaWiredPoePethPsePortAveragePower
This field specifies the average power in milliwatts drawn by the powered device (PD) on this port.
columnmilliwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.8
arubaWiredPoePethPsePortPeakPower
This field specifies the peak power supplied in milliwatts to the powered device (PD) connected to this port.
columnmilliwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.9