arubaWiredPoePethPsePortPseAssignedClass
ARUBAWIRED-POE-MIB ·
.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13
Object
column
Enumeration
This field indicates the actual class assigned by PSE to the PD.
Class demotion allows the PSE to allocate less than the PD requested
power based on the PD requested power and PSE available power. This
information is published to the PD via the LLDP protocol. This read-only
value indicates the PSE assigned class on this port.
This variable is valid only while a PD is being powered,
that is, while the attribute pethPsePortDetectionStatus
is reporting the enumeration deliveringPower.
Context
- MIB
- ARUBAWIRED-POE-MIB
- OID
.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- arubaWiredPoePethPsePortEntry
- Table
- arubaWiredPoePethPsePortTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | class0 |
2 | class1 |
3 | class2 |
4 | class3 |
5 | class4 |
6 | class5 |
7 | class6 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arubaWiredPoePethPsePortPowerAllocateBy Allows control over the power allocation strategy used for
this port. Two power allocation strategies are class(2)
and usage(1). When allocating by usage(1) power is delivered
as … | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1 |
| arubaWiredPoePethPsePortOperStatus This field specifies the operational status of the port. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.10 |
| arubaWiredPoePethPsePortPdSignature This Signature value represents the PD signature. This variable is
valid only while a PD is detected. In 802.3af and 802.3at standards
the power controller on the PSE uses two of … | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.11 |
| arubaWiredPoePethPsePortPowerClassification A read-only value that indicates the PD Class of a detected PD.
Classification is a way to tag different terminals on the
Power over LAN network according to their power consumpti… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.12 |
| arubaWiredPoePethPsePortPoECycle This object is used for PoE port reset with timeout of 1-60s.
PoE interface is disabled and then enabled with timeout as
input. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.14 |
| arubaWiredPoePethPsePortPreStdDetect This field specifies the pre standard detect configuration for this port.
A value of on - indicates that pre-802.3af-standard devices to power on.
A value of off - indicates that … | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.2 |
| arubaWiredPoePethPsePortRpd Rapid Power Down is executed by the hardware in the event of a power-supply
failure. It quickly cuts power to a PD to prevent an over-current scenario
in the PSE. This field indic… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3 |
| arubaWiredPoePethPsePortCurrent This field specifies the current supplied at this port.
This value is specified in milliamperes(mA). | column | milliamperes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.4 |
| arubaWiredPoePethPsePortVoltage This field specifies the Voltage supplied at this port.
This value is specified in 10's of Volts (dV). | column | deciVolts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.5 |
| arubaWiredPoePethPsePortReservedPower This field specifies quantum of power which has been
reserved for the PD at this port. This value is
specified in milliwatts (mW). | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.6 |
| arubaWiredPoePethPsePortPowerDrawn This field specifies quantum of power which has indicating
the actual power drawn by powered device(PD). This value
is specified in milliwatts (mW). | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.7 |
| arubaWiredPoePethPsePortAveragePower This field specifies the average power in milliwatts drawn by
the powered device (PD) on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.8 |
| arubaWiredPoePethPsePortPeakPower This field specifies the peak power supplied in milliwatts to
the powered device (PD) connected to this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.9 |