arubaWiredPoePethPsePortPowerAllocateBy

ARUBAWIRED-POE-MIB · .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1

MIB view Table view

Object

column r/w Enumeration

Allows control over the power allocation strategy used for
this port. Two power allocation strategies are class(2)
and usage(1). When allocating by usage(1) power is delivered
as requested by a PD. When allocating by class(2) the PSE
uses the power ramp-up signature of the PD to identify the
PD's power class and use the power level for the specified class.

Context

MIB: ARUBAWIRED-POE-MIB
OID: .1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1
Type: column
Access: readwrite
Status: current
Parent: arubaWiredPoePethPsePortEntry
Table: arubaWiredPoePethPsePortTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	usage
`2`	class

Related Objects

Sibling Objects

Object	Type	Syntax	OID
arubaWiredPoePethPsePortOperStatus This field specifies the operational status of the port.	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.10`
arubaWiredPoePethPsePortPdSignature This Signature value represents the PD signature. This variable is valid only while a PD is detected. In 802.3af and 802.3at standards the power controller on the PSE uses two of …	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.11`
arubaWiredPoePethPsePortPowerClassification A read-only value that indicates the PD Class of a detected PD. Classification is a way to tag different terminals on the Power over LAN network according to their power consumpti…	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.12`
arubaWiredPoePethPsePortPseAssignedClass This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD requested power and PSE…	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13`
arubaWiredPoePethPsePortPoECycle This object is used for PoE port reset with timeout of 1-60s. PoE interface is disabled and then enabled with timeout as input.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.14`
arubaWiredPoePethPsePortPreStdDetect This field specifies the pre standard detect configuration for this port. A value of on - indicates that pre-802.3af-standard devices to power on. A value of off - indicates that …	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.2`
arubaWiredPoePethPsePortRpd Rapid Power Down is executed by the hardware in the event of a power-supply failure. It quickly cuts power to a PD to prevent an over-current scenario in the PSE. This field indic…	column	Enumeration	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3`
arubaWiredPoePethPsePortCurrent This field specifies the current supplied at this port. This value is specified in milliamperes(mA).	column	milliamperes SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.4`
arubaWiredPoePethPsePortVoltage This field specifies the Voltage supplied at this port. This value is specified in 10's of Volts (dV).	column	deciVolts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.5`
arubaWiredPoePethPsePortReservedPower This field specifies quantum of power which has been reserved for the PD at this port. This value is specified in milliwatts (mW).	column	milliwatts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.6`
arubaWiredPoePethPsePortPowerDrawn This field specifies quantum of power which has indicating the actual power drawn by powered device(PD). This value is specified in milliwatts (mW).	column	milliwatts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.7`
arubaWiredPoePethPsePortAveragePower This field specifies the average power in milliwatts drawn by the powered device (PD) on this port.	column	milliwatts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.8`
arubaWiredPoePethPsePortPeakPower This field specifies the peak power supplied in milliwatts to the powered device (PD) connected to this port.	column	milliwatts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.9`