arubaWiredConfigurationCopyServerAddressType
ARUBAWIRED-CONFIG-MIB ·
.1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.8
Object
This object indicates the transport type of the address contained in arubaWiredConfigurationCopyServerAddress object. This must be created when either the arubaWiredConfigurationCopySourceFileType or arubaWiredConfigurationCopyDestFileType has the value 'externalFile'.
Context
- MIB
- ARUBAWIRED-CONFIG-MIB
- OID
.1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- arubaWiredConfigurationCopyEntry
- Table
- arubaWiredConfigurationCopyTable
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arubaWiredConfigurationCopyIndex Object which specifies a unique entry in the arubaWiredConfigurationCopyTable.
A management station wishing to initiate a configuration copy operation
should use a random value fo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.1 |
| arubaWiredConfigurationCopyUserName Remote username for copy via the protocol stated in arubaWiredConfigurationCopyProtocol. | column | OctetString | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.10 |
| arubaWiredConfigurationCopyUserPassword Remote password for copy via the protocol stated in arubaWiredConfigurationCopyProtocol.
This object must be created when the arubaWiredConfigurationCopyProtocol is:
- scp
- sftp
… | column | OctetString | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.11 |
| arubaWiredConfigurationCopyVRFName Remote vrf name for copy via the protocol stated in arubaWiredConfigurationCopyProtocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.12 |
| arubaWiredConfigurationCopyNotificationOnCompletion Specifies whether or not a arubaWiredConfigurationCopyCompletion
notification should be issued on completion of the
configuration transfer. If such a notification is desired,
it i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.13 |
| arubaWiredConfigurationCopyState Specifies the state of this configuration copy request.
This value of this object is instantiated only after
the row has been instantiated, i.e. after the
arubaWiredConfigurationC… | column | ConfigurationCopyState | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.14 |
| arubaWiredConfigurationCopyTimeStarted Specifies the time the arubaWiredConfigurationCopyState last
transitioned to 'running', or 0 if the state has
never transitioned to 'running' (e.g., stuck in
'waiting' state).
… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.15 |
| arubaWiredConfigurationCopyTimeCompleted Specifies the time the arubaWiredConfigurationCopyState last
transitioned from 'running' to 'successful' or
'failed' states.
This object is instantiated only
after … | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.16 |
| arubaWiredConfigurationCopyFailureCause The reason why the configuration copy operation failed.
This object is instantiated only when the
arubaWiredConfigurationCopyState for this entry is in the
'failed' state. | column | ConfigurationCopyFailureCause | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.17 |
| arubaWiredConfigurationCopyEntryRowStatus The status of this table entry. Once the entry
status is set to active, the associated entry cannot
be modified until the request completes
(arubaWiredConfigurationCopyState trans… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.18 |
| arubaWiredConfigurationCopySourceFileType Specifies the type of file to copy from. Either the
arubaWiredConfigurationCopySourceFileType or the
arubaWiredConfigurationCopyDestFileType (or both) must be of type:
- 'checkpoi… | column | ConfigurationFileType | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.2 |
| arubaWiredConfigurationCopyDestFileType Specifies the type of file to copy to. Either the
arubaWiredConfigurationCopySourceFileType or the
arubaWiredConfigurationCopyDestFileType (or both) must be of type:
- 'checkpoint… | column | ConfigurationFileType | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.3 |
| arubaWiredConfigurationCopyProtocol The protocol file transfer protocol that should be used to copy the configuration
file over the network. If the config file transfer is to occur locally on the SNMP
agent, the met… | column | ConfigurationCopyProtocol | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.4 |
| arubaWiredConfigurationCheckpointName Specifies the name of the checkpoint to copy.
This object must be created when either
the arubaWiredConfigurationCopySourceFileType or
arubaWiredConfigurationCopyDestFileType has
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.5 |
| arubaWiredConfigurationCopyFileFormat File format to be used when exporting the configuration to a
remote device.
This value is ignored unless arubaWiredConfigurationCopyDestFileType
is 'externalFile'. | column | ConfigurationFileFormat | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.6 |
| arubaWiredConfigurationCopyFileName The name (including the path, if applicable) of the file.
This object must be created when either
the arubaWiredConfigurationCopySourceFileType or
arubaWiredConfigurationCopyDestF… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.7 |
| arubaWiredConfigurationCopyServerAddress The network address of the remote server from (or to) which to copy
the configuration. This object must be created when either the
arubaWiredConfigurationCopySourceFileType or aru… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.47196.4.1.1.3.20.1.0.1.1.9 |