sipCfgRepeatDialingTimeout
ARRIS-SIP-MIB ·
.1.3.6.1.4.1.4115.11.1.31
Object
This integer specifies the length of time that the repeat dialing feature will retry. After this timer elapses no more retry attempts will be made. The timer is started when the feature code for repeat dialing is entered. It is only settable in the config file.
Context
- MIB
- ARRIS-SIP-MIB
- OID
.1.3.6.1.4.1.4115.11.1.31- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sipConfiguration
- Siblings
- 76
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sipCfgPortTable This table is used to define the SIP configurable data on a per port basis. | table | - | .1.3.6.1.4.1.4115.11.1.1 |
| sipCfgDialFeatMap This defines the dialed digits on a handset to the actual dialing feature.
It allows for 3 aliases per feature separated by commas followed by the dialing
feature name. A pipe … | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.10 |
| sipCfgDialFeatTable This table is used to define the SIP configurable data on a per port basis. | table | - | .1.3.6.1.4.1.4115.11.1.11 |
| sipCfgDialProxyMap This defines the dialed digits on a handset to the actual dialing feature that is to
be handled by a SIP Proxy.
It allows a dial code, a specified tone and the line… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.12 |
| sipCfgAlertInfoR0 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R0 Ringing Cadence. Note that there is
not a WT0 waiting t… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.13 |
| sipCfgAlertInfoR1 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R1 Ringing Cadence or the WT1 call waiting
tone depending o… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.14 |
| sipCfgAlertInfoR2 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R2 Ringing Cadence or the WT2 call waiting
tone depending o… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.15 |
| sipCfgAlertInfoR3 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R3 Ringing Cadence or the WT3 call waiting
tone depending o… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.16 |
| sipCfgAlertInfoR4 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R4 Ringing Cadence or the WT4 call waiting
tone depending o… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.17 |
| sipCfgAlertInfoR5 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R5 Ringing Cadence. Note that there is
not a WT5 waiting t… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.18 |
| sipCfgAlertInfoR6 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R6 Ringing Cadence. Note that there is
not a WT6 waiting t… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.19 |
| sipCfgDigitMap This table is used to define digit map for the device. The format of
the string is the same as a digit map used in MGCP. It is only
settable in the config file. This object is … | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.2 |
| sipCfgAlertInfoR7 This is the string that will be used as the value of the Alert-Info header field
to instruct the MTA to play either the R7 Ringing Cadence. Note that there is
not a WT7 waiting t… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.20 |
| sipCfgDomainOverride This is the string that will be used as the value of the domain in all outbound
SIP signalling messages. This can only be set in the configuration file | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.21 |
| sipCfgEmergencyNumber This is the string that will specify the emergency number. A call to an emergency # cannot
be pre-empted. If a three way call is attempted with an emergency # the other call is … | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.22 |
| sipCfgRegTimerMin This integer specifies the minimum registration retry interval (in seconds) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.23 |
| sipCfgRegTimerMax This integer specifies the maximum registration retry interval (in seconds) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.24 |
| sipCfgT1 This integer specifies the minimum wait time between retransmission for SIP outgoing calls(T1 in RFC 3261). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.25 |
| sipCfgMaxRetrans DEPRECATED - Please use sipCfgTimerB. This integer specifies the number of transmit attempts that will be made on an outgoing INVITE message | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.26 |
| sipCfgMediaLoopbackNumber This string specifies the number for media loopback. If an incoming call comes from this number the MTA
will treat the call as if it is a loopback call. The phone will not ring … | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.27 |
| sipCfgPacketLoopbackNumber This string specifies the number for packet loopback. If an incoming call comes from this number the MTA
will treat the call as if it is a loopback call. The phone will not ring… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.28 |
| sipCfgBusyDigitMap This table is used to define digit map for the device while busy tone is being played. The format of
the string is the same as a digit map used in MGCP. It is only
settable in … | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.29 |
| sipCfgProxyAdr This is the address of the SIP proxy server. This can be the same server
as the registrar server. This object is only settable during config file
download. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.3 |
| sipCfgRepeatDialingInterval This integer specifies the time between repeat dialing attempts for the repeat dialing feature. This
integer is represented as seconds. It is only settable in the config file. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.30 |
| sipCfgRepeatDialingSessionProgressTimer This integer specifies the length of time after a 183 is received before considering the repeat dialing attempt
successful. Often a 183 will be received prior to a negative respo… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.32 |
| sipCfgFeatureCapability | node | - | .1.3.6.1.4.1.4115.11.1.33 |
| sipCfgProxyDigitMap This table is used to define the digit map for the device after dialing
a star code that matches the proxy map. The format of the string is the
same as a digit map used in MGCP… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.34 |
| sipCfgCallWaitingStarCodeSurvivesReset An NVM setting has been added that stores the state of Call Waiting Permanent Disabled so that the state
survives a reset. This MIB enables the storage of the Call Waiting state … | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.35 |
| sipCfgResetCallWaitingStarCode This MIB is intended for use by the MSO to enable call waiting via SNMP if they have sipCfgCallWaitingDisableSurvivesReset
set to 1 and the following happens:
1. MSO issues a mo… | scalar | Bits | .1.3.6.1.4.1.4115.11.1.36 |
| sipCfgDialProxyTable This table replaces an older MIB, sipCfgDialProxyMap, and defines the dial features
that are handled by the proxy. | table | - | .1.3.6.1.4.1.4115.11.1.37 |
| sipCfgDhcp60AnnouncementMode Used to enable/disable SIP advertisement in MTA DHCP Option60.
This MIB can only be set via the CM configuration file. | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.38 |
| sipCfgCallForwardForbiddenNumbers There are certain phone numbers (eg 911) that Call Forwarding should
not accept as forwarding numbers. This MIB specifies which numbers
are not allowed as forwarding numbers. T… | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.39 |
| sipCfgProxyType This is the type of the SIP proxy server. This object is only settable during
config file download. | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.4 |
| sipCfgDefaultG711 RTP Default Voice or pass-thru codec. This object is only settable during config file
download. | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.40 |
| sipCfgGenLinger This integer specifies the wait time in milliseconds for response retransmits (non-INVITE) (Timer K in RFC 3261). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.41 |
| sipCfgInviteLinger This integer specifies the wait time in milliseconds for response retransmits (INVITE) and the wait time for ACK receipt (Timers D and H in RFC 3261). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.42 |
| sipCfgTimerB This integer specifies the INVITE transaction timeout timer in seconds(Timer B in RFC 3261). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.43 |
| sipCfgTimerF This integer specifies the non-INVITE transaction timeout timer in seconds(Timer F in RFC 3261). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.44 |
| sipCfgRegExpires This integer specifies the preferred registration expiry value (in seconds) sent in the REGISTER message.
If unspecified or the value is set to zero, no expiry value is preferred… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.45 |
| sipCfgMaxUDPSize This integer specifies the threshold at which point packets will begin being sent over TCP rather than UDP.
When set to zero, no threshold exists and all packets will be sent us… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.46 |
| sipCfgSessionExpires This integer specifies the preferred session expiry value (in seconds) sent in the INVITE message.
This value defaults to 1800 and the minimum value is 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.47 |
| sipCfgPenaltyBoxTimeout This integer specifies the timeout for entries in the SIP Proxy Penalty Box
in HOURS. Default is 24 hours. Note that entries may be evicted from the
Penalty Box before timeout i… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.48 |
| sipCfgDisconnectReorderToneDelay This MIB Object specifies the delay between receiving BYE message and playing Disconnect Reorder Tone in seconds | scalar | Unsigned32 | .1.3.6.1.4.1.4115.11.1.49 |
| sipCfgRegistrarAdr This is the address of the SIP registrar server, this can be the same
server as the proxy server. This object is only settable during config
file download. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.5 |
| sipCfgDistinctiveRingingForCallHold This is the type of distinctive ringing used when call is held | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.50 |
| sipCfgSipFeatureSwitch2 This object is like sipCfgSipFeatureSwitch. It is used to enable features of
the Arris SIP MTA. From left to right, the specified bit indicates whether
or not the corresponding f… | scalar | Bits | .1.3.6.1.4.1.4115.11.1.51 |
| sipCfgAuthPasswordKey This object is used for SIP password auto-generation feature. | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.52 |
| sipCfgMWITargetAddrType This MIB Object specifies the address type for the MWI subscription target specified in sipCfgMWITargetAddr.
If the element sipCfgMWITargetAddr contains a valid IP address, this … | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4115.11.1.53 |
| sipCfgMWITargetAddr This MIB Object specifies the target address for the MWI subscription, and it is associated with the address
type specified in sipCfgMWITargetAddrType. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4115.11.1.54 |
| sipCfgMWITargetPort This MIB Object specifies the target port for the MWI subscription. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.55 |
| sipCfgEmergencyServiceURN This is the string that will specify the emergency service urn according to RFC5031 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.56 |
| sipCfgSubsAlertTimeout This MIB Object specifies the alert timeout (time before subscription expiry) in seconds for subscriptions to
refresh. This MIB can only be applied via the Config File. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.57 |
| sipCfgProvisionalTimer This integer specifies the wait time in seconds for final response (Corresponding to Timer C of proxy in RFC 3261).
The timer is set when receiving a provisional response on an I… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.58 |
| sipCfg3WCWaitHookHoldTimer This MIB Object specifies the WaitHook Hold Timer in seconds when the Three Way Calling attempt fails
due to error or busy.Setting it to 0 means no timeout. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.59 |
| sipCfgRegistrarType This is the type of the SIP registrar server. This object is only settable
during config file download. | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.6 |
| sipCfgWaitHookHoldTone This string specifies the tone used in the two scenarios:
1. BYE is received from the third party before the Three Way Calling is connected.
2. BYE is recieved from the talking p… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.60 |
| sipCfgMinSE This integer specifies the preferred minimum session expiry(Min-SE) value (in seconds) sent in the INVITE message.
This value defaults to 90 and the minimum value is 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.61 |
| sipCfgInDialogRefer When this MIB value is true(1), it will force the REFER sent within existing dialog from Transferor to Transferee, no
matter whether the Transferee supports Target-Dialog header … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.62 |
| sipCfgFailoverSwitch This object is used to enable failover of SIP non-REGISTER request message. From
left to right, the specified bit indicates whether or not the failover of
corresponding message … | scalar | Bits | .1.3.6.1.4.1.4115.11.1.63 |
| sipCfgSubsRetryTimeout This MIB Object specifies the timer interval in seconds between retry of initial/refresh subscriptions.
Setting the value to 0 means no retry of initial/refresh subscription. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.64 |
| sipCfgPAccessNetworkInfoHeaderValue This MIB Object specifies the value that outgoing message would carry in P-Access-Network-Info header.
DOCSIS is the default value. | scalar | OctetString | .1.3.6.1.4.1.4115.11.1.65 |
| sipCfgTermOffHookProcessingDelay This MIB object specifies the delay time in seconds after a call is terminated before Extended Off Hook Processing begins, if the device remains off-hook. | scalar | Unsigned32 | .1.3.6.1.4.1.4115.11.1.66 |
| sipCfgT2 This integer specifies the maximum retransmit interval for non-INVITE requests and INVITE responses (T2 in RFC 3261) in milliseconds. It is recommended to set the timer equal or l… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.67 |
| sipCfgRegInterval This MIB object specifies the intervals between registrations of each line when system boots up. It means each lines register separately if the value of sipCfgRegInterval MIB is 0 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.68 |
| sipCfgOnhookDelayTimer This MIB object specifies the delay time of terminating the call when onhook. If the value is 0 which means the feature is disabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.69 |
| sipCfgSipFeatureSwitch This object is used to enable features of the Arris SIP MTA. From left to
right, the specified bit indicates whether or not the corresponding feature
is enabled. For example, i… | scalar | Bits | .1.3.6.1.4.1.4115.11.1.7 |
| sipCfgNetConfFactoryUri This MIB object specifies the conference factory URI.
If configured, on the second flash of a three-way call, EMTA will generate an INVITE to this URI for network conference creat… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.70 |
| sipCfgSipFeatureSwitch3 This object is like sipCfgSipFeatureSwitch. It is used to enable features of
the Arris SIP MTA. From left to right, the specified bit indicates whether
or not the corresponding f… | scalar | Bits | .1.3.6.1.4.1.4115.11.1.71 |
| sipCfgRegisterOnExpire A new MIB sipCfgRegisterOnExpire is introduced to reset MTA When certain SIP message is received in order to initialize a new REGISTER message.
If this MIB is enabled, When Subs… | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.72 |
| sipCfgServiceCapabilities This MIB object specifies User Agent Capabilities in the Session Initiation Protocol (SIP)(RFC 3840).
The string specifies User Agent Capabilities, the description of capability s… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.73 |
| sipCfgCIDDisDSTInfo The time zone option including DST information in the 'TZ-Posix String' format as defined in RFC 4833.
If this attribute is not the zero-length string the UE MUST perform the time… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4115.11.1.74 |
| sipCfgProtectedDnList This MIB is used to configure the list of protected dialed numbers that are not recorded when called.
Numbers are entered as strings separated by comma ',' and no white space betw… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.75 |
| sipCfgUnsetDontFragmentBit This MIB is used to clear or set don't fragment bit in IP header of SIP packets.
If the MIB is set to TRUE, don't fragment bit will be 0. If the MIB is set to FALSE, don't fra… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.76 |
| sipCfgMWISubscriptionCheckInterval This MIB specifies the interval (in minutes) that MTA checks the MWI subscription state.
If the line operational status is up and MWI subscription state is unsubscribed it will re… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.77 |
| sipCfgProvisionedCodecArray This is the list of codecs offered in the OFFER SDP. The order
of this list is also the order of preference used in the OFFER SDP.
These are entered as a string separated by semi… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.8 |
| sipCfgPacketizationRate RTP Packetization Rate. This object is only settable during config file
download. | scalar | Enumeration | .1.3.6.1.4.1.4115.11.1.9 |