sipCfgPortProxyType
ARRIS-SIP-MIB ·
.1.3.6.1.4.1.4115.11.1.1.1.13
Object
column
r/w
Enumeration
This is the type for the address of the SIP proxy server for this line. This object is only settable during config file download. It this object is used it will take precedence over any setting to the sipCfgProxyAdr MIB object for this line.
Context
- MIB
- ARRIS-SIP-MIB
- OID
.1.3.6.1.4.1.4115.11.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sipCfgPortEntry
- Table
- sipCfgPortTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | ipv4 |
1 | dns |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sipCfgPortPortNumber The unique value which identifies the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.1.1.1 |
| sipCfgPortRegistrarType This is the type for the address of the SIP registrar server for this line. This object
is only settable during config file download. It this object is used it will take
precede… | column | Enumeration | .1.3.6.1.4.1.4115.11.1.1.1.10 |
| sipCfgPortProxyAdr This is the address of the SIP proxy server for this line. This can be the same server
as the registrar server. This object is only settable during config file download. It this
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.11 |
| sipCfgPortProxyPort This is the port of the SIP proxy server for this line. This object is only settable
during config file download. It this object is used it will take precedence over any
setting… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.1.1.12 |
| sipCfgPortFeatureSettings This object allows for MSO control of certain feature states via the config file.
If the settings for these features do not need to be set a certain way at
powerup, then this MIB … | column | Bits | .1.3.6.1.4.1.4115.11.1.1.1.14 |
| sipCfgPortT38Mode This object is used to enable T38 mode for the line. By default T38 is disabled. To
enable it this value must be set to t38Loose or t38Strict. In t38Loose mode T38
negotiation w… | column | Enumeration | .1.3.6.1.4.1.4115.11.1.1.1.15 |
| sipCfgPortFaxOnlyTimeout This object is used to define a line as a fax only line. The default value of the
object is zero which means no timeout. When the object is set to a non-zero value
a timer is st… | column | Integer32 | .1.3.6.1.4.1.4115.11.1.1.1.16 |
| sipCfgPortMaxT38HSRedLevel This MIB is used to set the maximum high-speed redundancy level that will be used for
T.38 fax-relay in both the send and receive direction. High speed redundancy refers
to the… | column | Integer32 | .1.3.6.1.4.1.4115.11.1.1.1.17 |
| sipCfgPortCallByeDelay This MIB Object specifies the Bye Delay in seconds per line. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.11.1.1.1.18 |
| sipCfgPortMWIClear This MIB is used to clear or set the current MWI. If the MIB is set to FALSE, then the MTA will turn on both MWI tone
and visual MWI indicator. If the MIB is set to TRUE, the ton… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.19 |
| sipCfgPortUserName String used for the user portion of the SIP URI for this port. It is
suggested that this string be the phone number of the line so that it
can be used for Caller ID. This object… | column | OctetString | .1.3.6.1.4.1.4115.11.1.1.1.2 |
| sipCfgPortMWIVisualEnable This MIB Object enables or disables the visual indication for the MWI NOTIFY. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.20 |
| sipCfgPortMWIToneEnable This MIB Object enables or disables the stutter tone indication for the MWI NOTIFY. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.21 |
| sipCfgPortWarmOrHotlineEnable This MIB Object enables or disables the Warmline or Hotline feature.
sipCfgPortWarmOrHotlineNumber needs to be set to fully enable this feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.22 |
| sipCfgPortDndRingReminderEnable This MIB Object enables or disables the ringsplash when an IVNITE is rejected by DND. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.23 |
| sipCfgPortLoopReversal This MIB Object enables or disables the loop polarity/reversal.When enabled(1),it indicates
that if the line is calling party, it will reverse the polarity when the far end answe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.11.1.1.1.24 |
| sipCfgPortCurrentProxy This is the address of the SIP proxy currently used by the line. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.25 |
| sipCfgPortPrimaryProxy This is the primary proxy of the line. Only used in PC2.0 load. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.26 |
| sipCfgPortCallWaitingPermanentDisable This Mib is used for setting the persistent state of Call waiting.There are three value for setting: ignore, forceDisable, forceEnable.
If this MIB is set to ignore(0),call waitin… | column | Enumeration | .1.3.6.1.4.1.4115.11.1.1.1.27 |
| sipCfgPortCallerIDCallWaitingPermanentDisable This Mib is used for setting the persistent state of caller ID display in a call waiting scenario.
There are three value for setting: ignore, forceDisable, forceEnable.
If this MI… | column | Enumeration | .1.3.6.1.4.1.4115.11.1.1.1.28 |
| sipCfgPortDisplayName String used for the Display Name of the SIP URI. It is recommended that
this be the name of the subscriber so that it can be used for Caller
Name Delivery. This object is only se… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.3 |
| sipCfgPortLogin String used for the login name of the SIP agent for this line. This
object is only settable during config file download. Since this
setting is used as part of the authentication… | column | OctetString | .1.3.6.1.4.1.4115.11.1.1.1.4 |
| sipCfgPortPassword String used for the password of the SIP agent for this line. This
object is only settable during config file download. Since this
setting is used as part of the authentication p… | column | OctetString | .1.3.6.1.4.1.4115.11.1.1.1.5 |
| sipCfgPortWarmOrHotlineNumber To enable the warm or hotline feature on the line, this object must be set
to the phone number that will be called for the feature. For the warmline
feature this number should be… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.6 |
| sipCfgPortWarmLineTimeout This setting is used as the timer (in seconds) for the period of time
after an offhook before an INVITE for the warmline number is sent.
The default value for this object is 5 se… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.1.1.7 |
| sipCfgPortRegistrarAdr This is the address of the SIP registrar server for this line. This object is only
settable during config file download. It this object is used it will take precedence
over any… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.11.1.1.1.8 |
| sipCfgPortRegistrarPort This is the port of the SIP registrar server for this line. This object is only
settable during config file download. It this object is used it will take precedence
over any se… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.11.1.1.1.9 |