arrisGpsScanTimeout

ARRIS-GPS-MIB · .1.3.6.1.4.1.4115.12.6

MIB view Table view

Object

scalar r/w seconds Unsigned32

Specifies the time-out value in seconds since the scan started
after which the scan will time out. A timed out scan is to be
reported as C2 with ErrorDetails indicating 'Timed out'.
The value of this parameter is not persistent.
TR-069/TR-181 reference: Device.FAP.GPS.ScanTimeout.

Context

MIB: ARRIS-GPS-MIB
OID: .1.3.6.1.4.1.4115.12.6
Type: scalar
Access: readwrite
Status: current
Units: seconds
Parent: arrisGpsMib
Siblings: 14

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints

range: 1-3600

Related Objects

Sibling Objects

Object	Type	Syntax	OID
arrisGpsScanOnBoot Enables or disables GPS scans during the device start up. If this MIB is set, the modem will automatically start a GPS scan when it is power cycled or reset. If a successful lock …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.12.1`
arrisGpsLastSuccessfulScanTime Specifies the date and time, when the GPS scan last completed successfully. This value is retained across reboot and is only reset after another scan completes successfully or GPS…	scalar	OctetString	`.1.3.6.1.4.1.4115.12.10`
arrisGpsLockedLatitude This parameter specifies the latitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, north of the equator. The negative …	scalar	OctetString	`.1.3.6.1.4.1.4115.12.11`
arrisGpsLockedLongitude This parameter specifies the longitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, east of the prime meridian. The ne…	scalar	OctetString	`.1.3.6.1.4.1.4115.12.12`
arrisGpsNumberOfSatellites The number of satellites that were locked during the test execution. The greater the number of satellites the better the precision of the results. This value is retained across re…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4115.12.13`
arrisGpsReset Setting this to true will cause a reset on the GPS Hardware. Setting this to false has no effect. The value of this parameter is not part of the device configuration and is always…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.12.14`
arrisGpsSuccessfulScanSinceBootup Indicates whether or not the last successful scan occurred since the last time the modem powered up or reset. The value of this parameter is not persistent. TR-069/TR-181 referenc…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.12.15`
arrisGpsScanPeriodically Enables or disables periodic GPS scans. Note that if ScanPeriodically is set to FALSE and either ScanOnBoot is set to FALSE or the initial scan fails then the current position (po…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.12.2`
arrisGpsPeriodicInterval When ScanPeriodically is true, this value indicates the interval in seconds at which GPS scan is performed. This time period represents the amount of time between scans. The scan …	scalar	seconds Unsigned32	`.1.3.6.1.4.1.4115.12.3`
arrisGpsPeriodicTime PeriodicTime is used only to set the 'phase' of the GPS scan. The actual value of PeriodicTime can be arbitrarily far into the past or future. For example, if PeriodicInterval is …	scalar	OctetString	`.1.3.6.1.4.1.4115.12.4`
arrisGpsPowerDownAfterSuccessfulScan Enable/disable the ability to put the GPS to sleep after a successful scan. When set to FALSE the GPS will run periodically (if configured) even if a successful scan has occurred…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.12.5`
arrisGpsScanStatus Indicates the current status of this scan. Enumeration of: - Indeterminate (The scan has not been executed and there are no valid scan results available) - InProg…	scalar	Enumeration	`.1.3.6.1.4.1.4115.12.7`
arrisGpsErrorDetails Provides more detail when the ScanStatus is either Error or Error_TIMEOUT. The value of this parameter is not persistent. TR-069/TR-181 reference: Device.FAP.GPS.ErrorDetails.	scalar	OctetString	`.1.3.6.1.4.1.4115.12.8`
arrisGpsLastScanTime The date and time when the last GPS scan completed. Note that completion does not imply scan success. The Unknown Time value is returned if no scans have been completed. The absol…	scalar	OctetString	`.1.3.6.1.4.1.4115.12.9`