dcxFPDPowerStatus2
ARRIS-C3-FPD-MIB ·
.1.3.6.1.4.1.4115.1.4.3.3.1.2.3
Object
scalar
Enumeration
Specifies if the secondary power supply is working. This is the leftmost power supply(nearest the fan tray). The following values are possible: on(1) and off(2)
Context
- MIB
- ARRIS-C3-FPD-MIB
- OID
.1.3.6.1.4.1.4115.1.4.3.3.1.2.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- dcxFPDControlGroup
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcxFPDAttachedStatus Displays if the front panel display is
attached to the Cmts or not. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.1 |
| dcxFPDFan3Status Specifies the fan status for the fan 3rd from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside o… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.10 |
| dcxFPDFan4Status Specifies the fan status for the fan 4th from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.11 |
| dcxFPDFan5Status Specifies the fan status for the fan 5th from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.12 |
| dcxFPDFan6Status Specifies the fan status for the fan nearest the back of the box
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating ou… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.13 |
| dcxFPDFanUpperLimit Specifies the upper fan limit(Upper threshold of expected current draw) | scalar | Integer32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.14 |
| dcxFPDFanLowerLimit Specifies the lower fan limit(Lower threshold of expected current draw) | scalar | Integer32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.15 |
| dcxFPDLCDContrast Specifies the contrast level for the LCD | scalar | Integer32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.16 |
| dcxFPDLedSetStatus Used to turn on or off a Led on the front panel | scalar | Integer32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.17 |
| dcxFPDHwRevision Specifies the front panel h/w revision | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.18 |
| dcxFPDSwRevision Specifies the front panel s/w revision | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.19 |
| dcxFPDPowerStatus1 Specifies if the primary power supply is
working. This is the rightmost power supply.
The following values are possible:
on(1) and off(2) | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.2 |
| dcxFPDTemp1Status Specifies the temperature reading for the
sensor on the CPU card closest to the CPU. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.4 |
| dcxFPDTemp2Status Specifies the temperature reading for the
sensor on the CPU card, on the right hand side. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.5 |
| dcxFPDTemp3Status Specifies the temperature reading for the
sensor on the Kanga card under the Roo cards
between RX4 and RX5. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.6 |
| dcxFPDTemp4Status Specifies the temperature reading for the
sensor on the Kanga card under the Roo cards
between RX2 and RX3. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.4.3.3.1.2.7 |
| dcxFPDFan1Status Specifies the fan status for the fan nearest the front of the box.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.8 |
| dcxFPDFan2Status Specifies the fan status for the fan 2nd from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.4.3.3.1.2.9 |