fs6374RowStatus
ARICENT-fs6374-MIB ·
.1.3.6.1.4.1.29601.2.107.1.1.1.10
Object
This object specifies the status of service configuration row.
The writable columns in a row can be changed even if the row
is active but writable columns cannot be changed if either of
loss/delay/combined loss-delay test is in-progress.
Applicable values are CREATE_AND_GO, ACTIVE and DESTROY.
Context
- MIB
- ARICENT-fs6374-MIB
- OID
.1.3.6.1.4.1.29601.2.107.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fs6374ServiceConfigEntry
- Table
- fs6374ServiceConfigTable
- Siblings
- 16
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fs6374ContextId This object specifies the unique identifier to identifies the
virtual router context.Currently, the implementation supports
only a single virtual instance of the router. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.1 |
| fs6374DyadicMeasurement This object specifies the Dyadic Measurement status as
enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.29601.2.107.1.1.1.11 |
| fs6374TSFNegotiation This object specifies the Timestamp Format Negotiation status as
enabled or disabled.
This configuration is applicable only for Non-dyadic Two-way DM
and Combined LMDM and value… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.1.1.1.12 |
| fs6374TSNegotiatedFormat This object specifies the Negotiated Time Stamp Format of the
querier. This negotiated format is applicable only for
Non-dyadic Two-way DM and Combined LMDM.
The negotiated times… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.13 |
| fs6374DyadicProactiveRole This object specifies the Dyadic Measurement Proactive Role
status as active or passive.
If configured as passive, dyadic will initiated only after
initiated from active on pee… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.1.1.1.14 |
| fs6374QueryTransmitRetryCount This object specifies the maximum number of retries of queries by a session
when querier is not getting response from the responder.
This object is used for congestion control at … | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.15 |
| fs6374SessionIntervalQueryStatus This object specifies the Session Interval Query status as
enabled or disabled. This is applicable only for sending SQI TLV.
Whereas for responding to SQI TLV this is not mandato… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.1.1.1.16 |
| fs6374MinReceptionIntervalInMilliseconds This object specifies the minimum time interval between two query
packets at which the service is ready to receive the packets.
This object is used for congestion control and rate… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.17 |
| fs6374ServiceName This object specifies the unique name of the LSP/PW Service. | column | OctetString | .1.3.6.1.4.1.29601.2.107.1.1.1.2 |
| fs6374MplsPathType This object specifies the Mpls type which could be Tunnel/LSP or PW. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.1.1.1.3 |
| fs6374FwdTnlIdOrPwId This object specifies the ID which could be Tunnel Id for
unidirectional in forward direction or PW Id based on Mpls type. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.4 |
| fs6374RevTnlId This object specifies the ID which is the Tunnel Id for
unidirectional in reverse direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.1.1.1.5 |
| fs6374SrcIpAddr This object specifies the originating IP Address of the
unidirectional Tunnel or PW. | column | OctetString | .1.3.6.1.4.1.29601.2.107.1.1.1.6 |
| fs6374DestIpAddr This object specifies the terminating IP Address of the
unidirectional Tunnel or PW. | column | OctetString | .1.3.6.1.4.1.29601.2.107.1.1.1.7 |
| fs6374EncapType This object specifies the header type. | column | Enumeration | .1.3.6.1.4.1.29601.2.107.1.1.1.8 |
| fs6374TrafficClass This object specifies the traffic class. | column | Integer32 | .1.3.6.1.4.1.29601.2.107.1.1.1.9 |