fs6374MinReceptionIntervalInMilliseconds

ARICENT-fs6374-MIB · .1.3.6.1.4.1.29601.2.107.1.1.1.17
MIB view Table view

Object

column r/w milliseconds Unsigned32 
This object specifies the minimum time interval between two query
packets at which the service is ready to receive the packets.
This object is used for congestion control and rate limit the incoming 
queries at responder. This will be different from Transmit query interval 
time of a service. By default both transmit query interval and 
receive query interval are same. This has a granularity of 10 milliseconds.

Context

MIB
ARICENT-fs6374-MIB
OID
.1.3.6.1.4.1.29601.2.107.1.1.1.17
Type
column
Access
readwrite
Status
current
Units
milliseconds
Parent
fs6374ServiceConfigEntry
Table
fs6374ServiceConfigTable
Siblings
16

Syntax

milliseconds Unsigned32

Values & Constraints

Object Constraints
range: 100-10000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fs6374ContextId
This object specifies the unique identifier to identifies the virtual router context.Currently, the implementation supports only a single virtual instance of the router.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.107.1.1.1.1
fs6374RowStatus
This object specifies the status of service configuration row. The writable columns in a row can be changed even if the row is active but writable columns cannot be…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.29601.2.107.1.1.1.10
fs6374DyadicMeasurement
This object specifies the Dyadic Measurement status as enabled or disabled.
columnEnumeration.1.3.6.1.4.1.29601.2.107.1.1.1.11
fs6374TSFNegotiation
This object specifies the Timestamp Format Negotiation status as enabled or disabled. This configuration is applicable only for Non-dyadic Two-way DM and Combined LMDM and value…
columnEnumeration.1.3.6.1.4.1.29601.2.107.1.1.1.12
fs6374TSNegotiatedFormat
This object specifies the Negotiated Time Stamp Format of the querier. This negotiated format is applicable only for Non-dyadic Two-way DM and Combined LMDM. The negotiated times…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.107.1.1.1.13
fs6374DyadicProactiveRole
This object specifies the Dyadic Measurement Proactive Role status as active or passive. If configured as passive, dyadic will initiated only after initiated from active on pee…
columnEnumeration.1.3.6.1.4.1.29601.2.107.1.1.1.14
fs6374QueryTransmitRetryCount
This object specifies the maximum number of retries of queries by a session when querier is not getting response from the responder. This object is used for congestion control at …
columnUnsigned32.1.3.6.1.4.1.29601.2.107.1.1.1.15
fs6374SessionIntervalQueryStatus
This object specifies the Session Interval Query status as enabled or disabled. This is applicable only for sending SQI TLV. Whereas for responding to SQI TLV this is not mandato…
columnEnumeration.1.3.6.1.4.1.29601.2.107.1.1.1.16
fs6374ServiceName
This object specifies the unique name of the LSP/PW Service.
columnOctetString.1.3.6.1.4.1.29601.2.107.1.1.1.2
fs6374MplsPathType
This object specifies the Mpls type which could be Tunnel/LSP or PW.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.29601.2.107.1.1.1.3
fs6374FwdTnlIdOrPwId
This object specifies the ID which could be Tunnel Id for unidirectional in forward direction or PW Id based on Mpls type.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.107.1.1.1.4
fs6374RevTnlId
This object specifies the ID which is the Tunnel Id for unidirectional in reverse direction.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.107.1.1.1.5
fs6374SrcIpAddr
This object specifies the originating IP Address of the unidirectional Tunnel or PW.
columnOctetString.1.3.6.1.4.1.29601.2.107.1.1.1.6
fs6374DestIpAddr
This object specifies the terminating IP Address of the unidirectional Tunnel or PW.
columnOctetString.1.3.6.1.4.1.29601.2.107.1.1.1.7
fs6374EncapType
This object specifies the header type.
columnEnumeration.1.3.6.1.4.1.29601.2.107.1.1.1.8
fs6374TrafficClass
This object specifies the traffic class.
columnInteger32.1.3.6.1.4.1.29601.2.107.1.1.1.9