fs6374LMDyadicMeasurement
ARICENT-fs6374-MIB ·
.1.3.6.1.4.1.29601.2.107.5.1.1.24
Object
column
SNMPv2-SMIInteger32
This object specifies the Loss Calculation done over dyadic Measurement enable(1) Indicates that Loss over Dyadic disable(2) Indicates normal loss measurement.
Context
- MIB
- ARICENT-fs6374-MIB
- OID
.1.3.6.1.4.1.29601.2.107.5.1.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fs6374LMStatsTableEntry
- Table
- fs6374LMStatsTable
- Siblings
- 26
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fs6374LMStatsMplsType This object specifies the Mpls type which could be Tunnel/Lsp
or PW. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.1 |
| fs6374LMStatsTimeStampFormat This object specifies the value of timestamp format for the LM. | column | FS6374TimeStampFormat | .1.3.6.1.4.1.29601.2.107.5.1.1.10 |
| fs6374LMStatsStartTime This object specifies the time at which loss measurement starts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.11 |
| fs6374LMStatsFarEndLossMin This object specifies the minimum value of far-end loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.12 |
| fs6374LMStatsFarEndLossMax This object specifies the maxmium value of far-end loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.13 |
| fs6374LMStatsFarEndLossAvg This object specifies the average of the far-end loss measured
for a transaction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.14 |
| fs6374LMStatsNearEndLossMin This object specifies the minimum value of near-end loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.15 |
| fs6374LMStatsNearEndLossMax This object specifies the maxmium value of near-end loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.16 |
| fs6374LMStatsNearEndLossAvg This object specifies the average of the near-end loss measured
for a transaction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.17 |
| fs6374LMStatsTxPktCount This object specifies the number of frames with loss information
sent for a transaction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.18 |
| fs6374LMStatsRxPktCount This object specifies the number of frames with loss information
received for a transaction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.19 |
| fs6374LMStatsFwdTnlIdOrPwId This object specifies the Tunnel Id for unidirectional in forward
direction or PW Id based on Mpls type. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.2 |
| fs6374LMStatsThroughputpercent This object specifies the throughput loss value for a transaction. | column | OctetString | .1.3.6.1.4.1.29601.2.107.5.1.1.20 |
| fs6374LMStatsResponseErrors This object specifies the number of responses dropped due to
errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.21 |
| fs6374LMStatsResponseTimeout This object specifies the number of queries Timedout. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.22 |
| fs6374LMStatsMeasurementOnGoing This object specifies whether for the particular session,
measurement is ongoing or not.
Complete(0) Indicates measurement is ongoing.
OnGoing(1) Indicates measureme… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.23 |
| fs6374LMRemoteSessionId This object specifies Remote Session ID for the Loss/Comb LMDM
calculation done over dyadic Measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.25 |
| fs6374LMDyadicProactiveRole This object specifies the Loss Calculation done
for which Dyadic proactive role. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.26 |
| fs6374IsLMBufferSQIEnabled This object specifies whether the SQI was enabled or disabled
for the corresponding session when the LM buffer was created.
A value of 'true' indicates that SQI was enabled for … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.107.5.1.1.27 |
| fs6374LMStatsRevTnlId This object specifies the Tunnel Id for unidirectional in
reverse direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.107.5.1.1.3 |
| fs6374LMStatsSrcIpAddr This object specifies the source IP Address. | column | OctetString | .1.3.6.1.4.1.29601.2.107.5.1.1.4 |
| fs6374LMStatsDestIpAddr This object specifies the destination IP Address. | column | OctetString | .1.3.6.1.4.1.29601.2.107.5.1.1.5 |
| fs6374LMStatsTrafficClass This object specifies the traffic class. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.6 |
| fs6374LMStatsMode This object specifies the method (ondemand or proactive) used for LM.
This is not applicable for one-way type. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.7 |
| fs6374LMStatsMethod This object specifies the method (inferred or direct) used for LM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.8 |
| fs6374LMStatsType This object specifies the type (oneWay or twoWay) used for LM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.107.5.1.1.9 |