fs6374DMTransmitStatus
ARICENT-fs6374-MIB ·
.1.3.6.1.4.1.29601.2.107.2.1.1.13
Object
column
r/w
Fs6374TransmitStatus
This object specifies the status of delay transmit and
an Enumerated value set to 'start' to initiate 1DM or
DMM transmission and 'stop' to stop 1DM or DMM transmission.
The values 'ready' and 'notReady' indicate whether
1DM or DMM can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
Context
- MIB
- ARICENT-fs6374-MIB
- OID
.1.3.6.1.4.1.29601.2.107.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fs6374ParamsConfigTableEntry
- Table
- fs6374ParamsConfigTable
- Siblings
- 21
Syntax
Fs6374TransmitStatus
- Source
- Fs6374TransmitStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | start |
2 | stop |
3 | ready |
4 | notReady |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fs6374LMType This object specifies the type of LM calculation.
oneway(1) Indicates that calculation of LM will be in one way.
twoway(2) Indicates that calculation of L… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.1 |
| fs6374DMTimeIntervalInMilliseconds This object specifies the time interval between two query packets
for DM with the granularity of 10milliseconds.
This object cannot be modified when fs6374DMTransmitStatus
is `n… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.10 |
| fs6374DMNoOfMessages This object specifies the number of queries to be sent in a session
when method for LM calculation is Ondemand.
This object cannot be modified when fs6374DMTransmitStatus
is `notR… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.11 |
| fs6374DMTimeStampFormat This object specifies the preferred timestamp format
which will be used for delay measurement calculation.
The below specified timestamp formats are supported for
Delay Measurem… | column | FS6374TimeStampFormat | .1.3.6.1.4.1.29601.2.107.2.1.1.12 |
| fs6374CmbLMDMType This object specifies the combined LMDM calculation type
provided by the service. The following two types are
possible:
oneway - Indicates that calculation of combined LMDM wil… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.14 |
| fs6374CmbLMDMMethod This object specifies the combined LMDM calculation method
provided by the service. The following two methods are
possible:
direct - Indicates that the combined LMDM feature … | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.15 |
| fs6374CmbLMDMMode This object specifies the combined LMDM calculation mode
provided by the service. The following two modes are
possible:
onDemand - Indicates that calculation of combined LMDM… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.16 |
| fs6374CmbLMDMNoOfMessages This object specifies the number of combined LMDM queries to be
sent in a session when method for LM calculation is `Ondemand`.
This object cannot be modified when the fs6374CmbL… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.17 |
| fs6374CmbLMDMTimeIntervalInMilliseconds This object specifies the time interval between two combined
LMDM query packets for LM with the granularity of 10 milliseconds.
This object cannot be modified when fs6374CmbLMDM… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.18 |
| fs6374CmbLMDMTimeStampFormat This object specifies the preferred timestamp format
which will be used for combined LMDM calculation.
The below specified timestamp formats are supported for
Combined loss and … | column | FS6374TimeStampFormat | .1.3.6.1.4.1.29601.2.107.2.1.1.19 |
| fs6374LMMethod This object specifies the mode in which LM feature will work.
direct(1) Indicates that the LM feature will work in
Direct Method.
inferred(2) … | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.2 |
| fs6374CmbLMDMTransmitStatus This object specifies combined LMDM calculation transmission
status. The following two values are possible to set by
administrator:
start - To initiate combined LMDM transmissi… | column | Fs6374TransmitStatus | .1.3.6.1.4.1.29601.2.107.2.1.1.20 |
| fs6374DMPaddingSize This object specifies the size of the pattern to be included in
the Padding TLV of DM message.
This configuration is applicable only for Non-dyadic DM
Measurement.… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.21 |
| fs6374CmbLMDMPaddingSize This object specifies the size of the pattern to be included in
the Padding TLV of Combined LMDM message.
This configuration is applicable only for Non-dyadic
Com… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.22 |
| fs6374LMMode This object specifies the method of LM calculation.
onDemand(1) Indicates that calculation of LM will be
done based on user request.
proActive(2) In… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.3 |
| fs6374LMNoOfMessages This object specifies the number of queries to be sent in a session
when method for LM calculation is Ondemand.
This object cannot be modified when fs6374LMTransmitStatus
is `not… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.4 |
| fs6374LMTimeIntervalInMilliseconds This object specifies the time interval between two query packets
for LM with the granularity of 10milliseconds.
This object cannot be modified when fs6374LMTransmitStatus
is `no… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.29601.2.107.2.1.1.5 |
| fs6374LMTimeStampFormat This object specifies the preferred timestamp format
which will be used for LM.
The below specified timestamp formats are supported for
Loss Measurement but now, time stamp for… | column | FS6374TimeStampFormat | .1.3.6.1.4.1.29601.2.107.2.1.1.6 |
| fs6374LMTransmitStatus This object specifies the status of loss transmit. | column | Fs6374TransmitStatus | .1.3.6.1.4.1.29601.2.107.2.1.1.7 |
| fs6374DMType This object specifies the type of DM calculation.
oneway(1) Indicates that calculation of DM will be one-way.
twoway(2) Indicates that calculation of DM… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.8 |
| fs6374DMMode This object specifies the method of DM calculation.
onDemand(1) Indicates that calculation of DM will be done
based on user request.
proActive(2) Indicate… | column | Enumeration | .1.3.6.1.4.1.29601.2.107.2.1.1.9 |