fsY1564SlaConfTestDuration
ARICENT-Y1564-CFG-MIB ·
.1.3.6.1.4.1.29601.2.88.2.1.1.9
Object
column
r/w
Integer32
This object specifies the duration of each individual test in seconds. If Configuration test is started with CIR, EIR, Traffic Policing and fsY1564SlaConfTestDurationis specified as 10 then all the three tests should be completed within 30 seconds.
Context
- MIB
- ARICENT-Y1564-CFG-MIB
- OID
.1.3.6.1.4.1.29601.2.88.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsY1564SlaEntry
- Table
- fsY1564SlaTable
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 10-60
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsY1564SlaId This object specifies the Y1564 Service Level Agreement Identifier
(An Agreement between service provider and subscribers).
This is a free running index used to identify the SLA. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.1 |
| fsY1564SlaTestStatus This object specifies the Y1564 Service Configuration
test initiation status.
An enumerated value set to 'start' initiates service
configuration test based on bits selected in
o… | column | Enumeration | .1.3.6.1.4.1.29601.2.88.2.1.1.10 |
| fsY1564SlaServiceConfId This object specifies the Service Configuration to which the SLA is currently
mapped. Multiple services can be created and each can be associated
to a given SLA. Each service cont… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.11 |
| fsY1564SlaColorMode This object specifies whether the color-aware or color blind property is
employed by the bandwidth profile. The default value for this object is
ColorBlind. | column | Enumeration | .1.3.6.1.4.1.29601.2.88.2.1.1.12 |
| fsY1564SlaCoupFlag This object specifies the modes of operation of the rate enforcement
algorithm. The choice of the value for CF has the effect of controlling the
volume of the Service Frames that… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.88.2.1.1.13 |
| fsY1564SlaCIR The committed information rate Must be >= 0. CIR must be less than or
equal to EIR,if EIR > 0. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.14 |
| fsY1564SlaCBS The committed burst size Must be > 0 if CIR > 0. | column | Bytes Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.15 |
| fsY1564SlaEIR The excess information rate Must be >= 0. EIR must be greater than or
equal to CIR,if EIR > 0. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.16 |
| fsY1564SlaEBS The excess burst size Must be > 0 if EIR > 0. | column | Bytes Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.17 |
| fsY1564SlaTrafPolicing This object specifies the Traffic policing status. If the Trafific policing
status is set as off then Traffic polincing test is not triggered for the
specified SLA Id.Default Va… | column | Enumeration | .1.3.6.1.4.1.29601.2.88.2.1.1.18 |
| fsY1564SlaTestSelector This object specifies the Test Input to be tested for the Test.
A FOUR BYTE integer is used to specify the Test Inputs. Each BIT in the
four byte integer represent… | column | Integer32 | .1.3.6.1.4.1.29601.2.88.2.1.1.19 |
| fsY1564SlaEvcIndex This object specifies the service provider VLAN (S-VLAN)
on which service is created. The EVC is configured using MEF MIB.
Internally this object refers to fsEvcIndex in MEF MIB. | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.29601.2.88.2.1.1.2 |
| fsY1564SlaCurrentTestMode This object specifies the currently running test
in service configuration test.
The mode will be one of the following
0 - Indicates the no test is in progress
1 - S… | column | Integer32 | .1.3.6.1.4.1.29601.2.88.2.1.1.20 |
| fsY1564SlaCurrentTestState This object specifies the current test state of the SLA. | column | Enumeration | .1.3.6.1.4.1.29601.2.88.2.1.1.21 |
| fsY1564SlaRowStatus This object specifies the row status and is used to create or
deletea new entry by setting this object to the appropriate value as
mentioned in SMI-v2. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.88.2.1.1.22 |
| fsY1564SlaMEG This object specifies the Maintenance Entity Group (MEG) of the
fsY1564SlaEntry. Internally this object refers to MIB object
dot1agCfmMdIndex of ECFM 802.1ag standard. The value … | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.3 |
| fsY1564SlaME This object specifies the Maintenance Entity (ME) of the
fsY1564SlaEntry.Internally this object refers to MIB object
dot1agCfmMaIndex of ECFM 802.1ag standard. The value Zero i… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.4 |
| fsY1564SlaMEP This object specifies the Maintenance Association End Point (MEP)
of the fsY1564SlaEntry. Internally this object refers to MIB object
dot1agCfmMepIdentifier of ECFM 802.1ag stan… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.5 |
| fsY1564SlaSacId This object specifies the Service Acceptance Criteria to which
the SLA is currently mapped.Multiple SACs can be created and
each can be associated to a given SLA.Each SAC refers… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.6 |
| fsY1564SlaTrafProfileId This object specifies the Traffic Profile to which the SLA is currently
mapped. Multiple packet profiles can be created and each can be associated
to a given SLA. Each packet pr… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.2.1.1.7 |
| fsY1564SlaStepLoadRate This object specifies the step load rate of the step load CIR
(Committed Information Rate) configuration test. If no
value is provided, 25% of CIR is sent first,followed by
50%… | column | Integer32 | .1.3.6.1.4.1.29601.2.88.2.1.1.8 |