fsRrd6ThrotLimit

ARICENT-RTM6-MIB · .1.3.6.1.4.1.2076.92.1.8

MIB view Table view

Object

scalar r/w Unsigned32

In RTM6 operations which hogs CPU for a long time are being throttled.
These events will process only limited number of routes set by this
object for each iteration. Typically, the values used shall be
in the range 1..65535

Context

MIB: ARICENT-RTM6-MIB
OID: .1.3.6.1.4.1.2076.92.1.8
Type: scalar
Access: readwrite
Status: current
Parent: fsrrd6Scalar
Siblings: 13

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 1-4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsRrd6RouterId The 4-byte Identifier value that uniquely identifies the router in its operational environment. This can be set only if the fsRrd6AdminStatus is disabled.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2076.92.1.1`
fsRrd6MaximumOspfRoutes This Object configures the number of OSPF routes to be programmed in RTM6	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.10`
fsRrd6MaximumRipRoutes This Object configures the number of RIP routes to be programmed in RTM6	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.11`
fsRrd6MaximumStaticRoutes This Object configures the number of STATIC routes to be programmed in RTM6	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.12`
fsRrd6MaximumISISRoutes This Object configures the number of ISIS routes to be programmed in RTM6	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.13`
fsRtm6StaticRouteDistance This object specifies the default administrative distance for IPv6 static routes.	scalar	Integer32	`.1.3.6.1.4.1.2076.92.1.14`
fsRrd6FilterByOspfTag To enable distribution of routes based on the tag value (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD6 control table.	scalar	Enumeration	`.1.3.6.1.4.1.2076.92.1.2`
fsRrd6FilterOspfTag The tag based on which routes have to be filtered for export to routing protocols	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.92.1.3`
fsRrd6FilterOspfTagMask The bitmask to be applied to fsRrd6FilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.92.1.4`
fsRrd6RouterASNumber The Autonomous system number in which this router is running.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.92.1.5`
fsRrd6AdminStatus The Admin status of the RTM. This object can be set to enabled only after setting the AS number and the Router ID to a valid value.	scalar	Enumeration	`.1.3.6.1.4.1.2076.92.1.6`
fsRrd6Trace Enables the tracing in the selected submodule in RTM6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisati…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.7`
fsRrd6MaximumBgpRoutes This Object configures the number of BGP routes to be programmed in RTM6	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.92.1.9`