fsRstSystemControl
ARICENT-RSTP-MIB ·
.1.3.6.1.4.1.2076.79.1.1
Object
scalar
r/w
Enumeration
The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and RSTP should be supported in the device on all ports. The value shutdown(2) indicates that RSTP should be shutdown in the device on all ports and all allocated memory must be released.
Context
- MIB
- ARICENT-RSTP-MIB
- OID
.1.3.6.1.4.1.2076.79.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- dot1wFutureRst
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | start |
2 | shutdown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsRstPortRoleSelSmState This indicates the current state of the Port Role Selection State
Machine.
This object will hold the value 'initbridge' when the Port Role Selection
state machine is in the INIT_B… | scalar | Enumeration | .1.3.6.1.4.1.2076.79.1.10 |
| fsRstOldDesignatedRoot The bridge identifier of the old root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. | scalar | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2076.79.1.11 |
| fsRstPortExtTable This is a table that is an extension to the dot1dStpExtPortTable.
This contains object(s) that are Port-based. | table | - | .1.3.6.1.4.1.2076.79.1.12 |
| fsRstDynamicPathcostCalculation This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.79.1.13 |
| fsRstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.79.1.14 |
| fsRstRcvdEvent This object gives information about the recently received event in the
system.
Currently, we support only ConfigurationEvent. | scalar | Enumeration | .1.3.6.1.4.1.2076.79.1.15 |
| fsRstRcvdEventSubType This object gives information about sub-type of the event received in
the system recently. The value of this object depends on the value of
the object fsRstRcvdEvent.For Configur… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.79.1.16 |
| fsRstRcvdEventTimeStamp The time stamp (in milli seconds) at which event specified by the object
fsRstRcvdEvent was received in the system at STP module for the last time.
This object is introduced to me… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.79.1.17 |
| fsRstRcvdPortStateChangeTimeStamp The time stamp (in milli seconds) at which port state has been changed in
the system. This object is introduced to measure the convergence time in
RSTP module. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.79.1.18 |
| fsRstBpduGuard This object configures BPDU guard globally in RSTP
and this global BPDU is applicable if and only if no Port specific
BpduGuard is configured.
Enable - enables BPDU Guard featu… | scalar | Enumeration | .1.3.6.1.4.1.2076.79.1.19 |
| fsRstModuleStatus The administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be ena… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.79.1.2 |
| fsRstStpPerfStatus This object enables or disables the collection of performance data for
the RSTP protocol.
'enable' (1) indicates that collection of RSTP performance data is
enabled on all ports … | scalar | Enumeration | .1.3.6.1.4.1.2076.79.1.20 |
| fsRstStpPathCostType The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A v… | scalar | Enumeration | .1.3.6.1.4.1.2076.79.1.21 |
| fsRstTraceOption This object is used to enable Trace Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer rep… | scalar | Integer32 | .1.3.6.1.4.1.2076.79.1.3 |
| fsRstDebugOption This object is used to enable Debug Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer r… | scalar | Integer32 | .1.3.6.1.4.1.2076.79.1.4 |
| fsRstRstpUpCount The number of times RSTP Module has been enabled. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.79.1.5 |
| fsRstRstpDownCount The number of times RSTP Module has been disabled. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.79.1.6 |
| fsRstBufferFailureCount The number of times buffer overflows/failures have occurred.
A Trap is generated on the occurrence of this event. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.79.1.7 |
| fsRstMemAllocFailureCount The number of times memory allocation failures have occurred.
A Trap is generated on the occurrence of this event. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.79.1.8 |
| fsRstNewRootIdCount The number of times this Bridge has detected a new Root in the topology.
A Trap is generated on the occurrence of this event. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.79.1.9 |