fsRstDynamicPathcostCalculation

ARICENT-RSTP-MIB · .1.3.6.1.4.1.2076.79.1.13
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by 
management. If set to true, pathcost is calculated dynamically 
from port speed(when the operational status of the port changes 
from down to up). Otherwise, the link speed at the time of port 
creation is used for calculating the path cost. In both cases,
if the user has configured a pathcost for the port that will be 
used. By default, dynamic pathcost calculation is set to false.

Context

MIB
ARICENT-RSTP-MIB
OID
.1.3.6.1.4.1.2076.79.1.13
Type
scalar
Access
readwrite
Status
current
Parent
dot1wFutureRst
Siblings
20

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsRstSystemControl
The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and …
scalarEnumeration.1.3.6.1.4.1.2076.79.1.1
fsRstPortRoleSelSmState
This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state machine is in the INIT_B…
scalarEnumeration.1.3.6.1.4.1.2076.79.1.10
fsRstOldDesignatedRoot
The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.
scalarBRIDGE-MIBBridgeId.1.3.6.1.4.1.2076.79.1.11
fsRstPortExtTable
This is a table that is an extension to the dot1dStpExtPortTable. This contains object(s) that are Port-based.
table-.1.3.6.1.4.1.2076.79.1.12
fsRstCalcPortPathCostOnSpeedChg
This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.79.1.14
fsRstRcvdEvent
This object gives information about the recently received event in the system. Currently, we support only ConfigurationEvent.
scalarEnumeration.1.3.6.1.4.1.2076.79.1.15
fsRstRcvdEventSubType
This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcvdEvent.For Configur…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2076.79.1.16
fsRstRcvdEventTimeStamp
The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object is introduced to me…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.79.1.17
fsRstRcvdPortStateChangeTimeStamp
The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.79.1.18
fsRstBpduGuard
This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard featu…
scalarEnumeration.1.3.6.1.4.1.2076.79.1.19
fsRstModuleStatus
The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be ena…
scalarEnabledStatus.1.3.6.1.4.1.2076.79.1.2
fsRstStpPerfStatus
This object enables or disables the collection of performance data for the RSTP protocol. 'enable' (1) indicates that collection of RSTP performance data is enabled on all ports …
scalarEnumeration.1.3.6.1.4.1.2076.79.1.20
fsRstStpPathCostType
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A v…
scalarEnumeration.1.3.6.1.4.1.2076.79.1.21
fsRstTraceOption
This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer rep…
scalarInteger32.1.3.6.1.4.1.2076.79.1.3
fsRstDebugOption
This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer r…
scalarInteger32.1.3.6.1.4.1.2076.79.1.4
fsRstRstpUpCount
The number of times RSTP Module has been enabled.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2076.79.1.5
fsRstRstpDownCount
The number of times RSTP Module has been disabled.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2076.79.1.6
fsRstBufferFailureCount
The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2076.79.1.7
fsRstMemAllocFailureCount
The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2076.79.1.8
fsRstNewRootIdCount
The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2076.79.1.9