fsRmIpAddress

ARICENT-RM-MIB · .1.3.6.1.4.1.2076.99.1.20
MIB view Table view

Object

scalar r/w SNMPv2-SMIIpAddress 
This object is used only if the Rm stacking interface type is
Inband.This object is used to specify the IP Address to be used 
for RM TCP /IP communication .
          
If RM stacking interface type is Inband,a dedicated IP
Interface will be created for RM communication and this IP 
Address will be assigned to the Interface. 
          
This value is read from NodeId File.If it is not available,
Default Value will be added  with the switch ID plus one to 
calculate the IP Address .A link local IP Address 169.254.1.1 
is used as the Default IP Address.
          
Configuring this object  will result in updation to nodeid file.
The configured value will take effect in ISS on next reboot.

Context

MIB
ARICENT-RM-MIB
OID
.1.3.6.1.4.1.2076.99.1.20
Type
scalar
Access
readwrite
Status
current
Parent
fsRm
Siblings
23

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsRmSelfNodeId
The NodeId of this node
scalarOctetString.1.3.6.1.4.1.2076.99.1.1
fsRmSwitchId
Slot Number of a Switch in a Stacked environment. This object is applicable only for Coldstandby case.
scalarInteger32.1.3.6.1.4.1.2076.99.1.10
fsRmConfiguredState
The value represents the configured/desired state of the switch in a Stacked environment 1 - Preferred Master 2 - Backup Master 3 - Preferred Slave This object is…
scalarEnumeration.1.3.6.1.4.1.2076.99.1.11
fsRmStackMacAddr
Stack Mac Address of the switch in a Stacked environment. This object is applicable only for Coldstandby case.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.2076.99.1.12
fsRmPeerTable
RM Peer Table consists of Peer infomation in a Stacked environment. This table is applicable only for Coldstandby case.
table-.1.3.6.1.4.1.2076.99.1.13
fsRmStackPortCount
The object defines the number of stack ports configured in a device for the purpose of stacking. BY default the stack port count will be zero. If the stack port count is zero, al…
scalarInteger32.1.3.6.1.4.1.2076.99.1.14
fsRmColdStandby
The object is for enabling or disabling the coldstandby stacking support in a stacked environment. By default it will be disabled.
scalarEnumeration.1.3.6.1.4.1.2076.99.1.15
fsRmModuleTrc
This object is used to enable the High Availability enabled module trace. Currently defined modules as follows: 0x00000001 -- VCM module trace 0x00000002 -- MBSM module trace 0x…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.99.1.16
fsRmProtocolRestartFlag
This object is used for enabling or disabling the restart of all the protocols registered with the RM, in the standby state, when the ISS node reaches an unpredictable state like …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.99.1.17
fsRmProtocolRestartRetryCnt
This object is used to specify the maximum number of times the protocols in the ISS switch can be restarted when the ISS node reaches an unpredictable state. The protocols will b…
scalarUnsigned32.1.3.6.1.4.1.2076.99.1.18
fsRmHitlessRestartFlag
This object is used for hitless restart feature. Initially this object is set as disable (value = 0). User is allowed to configure only the value store (value = 1). When this ob…
scalarEnumeration.1.3.6.1.4.1.2076.99.1.19
fsRmPeerNodeId
The NodeId of the Peer. Currently one peer is supported.
scalarOctetString.1.3.6.1.4.1.2076.99.1.2
fsRmSubnetMask
This object is used only if the Rm stacking interface type is Inband.This object is used to specify the Subnet Mask to be associated withIP Address to be used for RM TCP /IP com…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2076.99.1.21
fsRmStackInterface
This object is used only if the Rm stacking interface type is Inband.This object is used to specify the Stacking port to be used for RM TCP/IP …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2076.99.1.22
fsRmCopyPeerSyLogFile
The object reflects the status of the log transfer from standby to active node whether it is in-progress, successful or failed. The user cannot set the values inProgress, success…
scalarEnumeration.1.3.6.1.4.1.2076.99.1.23
fsRmDynamicSyncAuditTrigger
This object sets the Application Ids for which dynamic syncup audit is required. The Application Ids are defined as follows: 0x0000 -- No Module. 0x0001 -- VCM MODULE. 0x0002 -- …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.99.1.24
fsRmActiveNodeId
The NodeId of the active node. Active node is elected by discovering the peer node Ip address and then selecting the node with greater Ip address.
scalarOctetString.1.3.6.1.4.1.2076.99.1.3
fsRmNodeState
State of the node. The state of the node is decided after election. Election is based on the NodeId.
scalarFsRmState.1.3.6.1.4.1.2076.99.1.4
fsRmHbInterval deprecated
The time interval in milli-seconds, between the Heart Beat messages. This value should be 4 times lesser than that of PeerDead Interval. This value must be same for all the node…
scalarInteger32.1.3.6.1.4.1.2076.99.1.5
fsRmPeerDeadInterval
The number of milli-seconds that a node's Heart Beat messages have not seen before declaring peer down. This value should be 4 times greater than that of the Heart Beat Interva…
scalarInteger32.1.3.6.1.4.1.2076.99.1.6
fsRmTrcLevel
Level of trace required for RM. The levels are defined as follows: 0x00000001 -- Init-Shut Trace. 0x00000002 -- Management Trace. 0x00000004 -- Data path Trace. 0x00000008 -- Con…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.99.1.7
fsRmForceSwitchoverFlag
To force-switchover the ACTIVE node to become STANDBY, this flag can be enabled. This object is not saved and restored during mib save-restore operation 1. enable - Used to tri…
scalarEnumeration.1.3.6.1.4.1.2076.99.1.8
fsRmPeerDeadIntMultiplier deprecated
The peer dead interval is expressed as a multiple of heart beat interval. This object is used to store the multiplier value by which the heart beat interval is multiplied to get…
scalarInteger32.1.3.6.1.4.1.2076.99.1.9