fsrip6RRDProtoMaskForEnable
ARICENT-RIP6-MIB ·
.1.3.6.1.4.1.2076.3.1.7
Object
The bit mask of source protocols from which routes are
imported to RIP.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes can be
redistributed into RIP. (value = 2)
Bit 2, if set, indicates that static routes can be
redistributed into RIP. (value = 4)
Bit 5, if set to 1, indicates that routes from OSPF can be
redistributed into RIP. (value = 32)
Bit 6, if set to 2, indicates that BGP routes can be
redistributed into RIP. (value = 64)
Bit 9, if set to 2, indicates that ISIS Level-1 routes can be
redistributed into RIP. (value = 512)
Bit 10, if set to 2, indicates that ISIS Level-2 routes can be
redistributed into RIP. (value = 1024)
Other bits are reserved for future use.
Context
- MIB
- ARICENT-RIP6-MIB
- OID
.1.3.6.1.4.1.2076.3.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsrip6Scalars
- Siblings
- 10
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsrip6RoutePreference The route prefered for forwarding a packet to a
destination when a statically configured route,
as well as a dynamically learnt route exists for
a particular destination. If th… | scalar | Enumeration | .1.3.6.1.4.1.2076.3.1.1 |
| fsrip6RRDRouteMapName Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure the
new value. | scalar | OctetString | .1.3.6.1.4.1.2076.3.1.10 |
| fsrip6RouteCount Indicates the number of route entries. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.3.1.11 |
| fsrip6GlobalDebug Enables the tracing in RIP6. A 32 bit
integer is used to store the Tracing level.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management … | scalar | Integer32 | .1.3.6.1.4.1.2076.3.1.2 |
| fsrip6GlobalInstanceIndex This object specifes Instance Index, used to
indicate the instance w.r.t which all the
configuration will be performed. Before any
configuration this object has to be set to th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.3.1.3 |
| fsrip6PeerFilter Flag to set peer list to allow or deny.
if the flag set to allow, then responses from the
peers in the list can be allowed to be processed.
If the flag is set to deny, the respon… | scalar | Enumeration | .1.3.6.1.4.1.2076.3.1.4 |
| fsrip6AdvFilter Flag to enable filtering of routes in the Ripng
responses to be advertised. Setting the flag to
enable(1) will filter the corresponding routing
entries in the response, that ar… | scalar | Enumeration | .1.3.6.1.4.1.2076.3.1.5 |
| fsRip6RRDAdminStatus Controls redistribution of Direct, Static, OSPF and BGP
routes into RIP. If this object is set to enable, then
routes from protocols as specified by
fsrip6RRDProtoMaskForEnable wi… | scalar | Enumeration | .1.3.6.1.4.1.2076.3.1.6 |
| fsrip6RRDSrcProtoMaskForDisable The bit mask of source protocols from which redistribution
to BGP is disabled.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes cannot be
redistrib… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.3.1.8 |
| fsrip6RRDRouteDefMetric The default metric to be used for the imported routes
from RTM6. If 0, then metric value from the RTM6 will
be used. | scalar | Integer32 | .1.3.6.1.4.1.2076.3.1.9 |