fsQoSTrcFlag

ARICENT-QOS-MIB · .1.3.6.1.4.1.29601.2.6.1.1.3

Object

scalar r/w Unsigned32

This object is used to enable trace statements in QoS module. 
A four byte integer is used for enabling the trace level.  
Each bit in the four byte integer represents a particular  
trace level.  
The mapping between the bit positions & the trace level is  
as follows:  
        0 - Init and Shutdown traces 
        1 - Management traces 
        2 - Data Path traces 
        3 - Control Plane traces 
        5 - Traces related to all resources except buffers 
        6 - Buffer allocation/release traces 
        7 - All Failure traces 
        None of the bit is set the Disable the Trace,value(0). 
          
The remaining bits are unused. Combination of levels are  
also allowed. 
          
For example if the bits 0 and 1 are set, then the trace 
statement related to Init-Shutdown and management  
will be printed. 
          
The user has to enter the corresponding integer value for the 
bits set. For example if bits 0 and 1 are to be set ,then user
has to give the value 3.

Context

MIB: ARICENT-QOS-MIB
OID: .1.3.6.1.4.1.29601.2.6.1.1.3
Type: scalar
Access: readwrite
Status: current
Parent: fsQoSSystem
Siblings: 5

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 0-255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsQoSSystemControl Starts or shutdowns QoS Module in the system. When set as 'start',resources required by QoS module are allocated & QoS module starts running. When shutdown, all the pools used by …	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.1`
fsQoSStatus Enables or Disables QoS Module in the system. When set as 'enabled', QoS module programs the hardware and starts Protocol Operation. When set as 'disabled', it stops protocol oper…	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.2`
fsQoSRateUnit This Object indicates the unit for the Information Rate(CIR,EIR,PIR,PTR,CTR ...)values based on target platform. This Object specifies the unit alone. Value corresponding to …	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.4`
fsQoSRateGranularity This Object indicates the acceptable Granularity level for configuring the Information Rate(CIR,EIR,PIR,PTR, CTR ...)values for a target platform. This Object specifies the Integ…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.6.1.1.5`
fsQoSVlanQueueingStatus This object is used to enable or disable Vlan Based Queueing in the system. When set as 'enabled', QoS module programs the hardware with the Hierarchical Scheduling Schema for Vl…	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.6`