fsPvrstBridgeDetectionSemState

ARICENT-PVRST-MIB · .1.3.6.1.4.1.2076.161.1.13.1.4
MIB view Table view

Object

column Enumeration 
Current state of the bridge detection state machine
of this port for all Spanning Tree context.

Context

MIB
ARICENT-PVRST-MIB
OID
.1.3.6.1.4.1.2076.161.1.13.1.4
Type
column
Access
readonly
Status
current
Parent
fsFuturePvrstPortEntry
Table
fsFuturePvrstPortTable
Siblings
28

Syntax

Enumeration

Values & Constraints

Enumerated Values
0edge
1notedge

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsPvrstPort
Port Number for the Context.
columnInteger32.1.3.6.1.4.1.2076.161.1.13.1.1
fsPvrstPortOperPointToPoint
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.10
fsPvrstPortInvalidBpdusRcvd
Number of invalid PVRST BPDUs received on this port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.161.1.13.1.11
fsPvrstPortInvalidConfigBpduRxCount
Number of invalid configuration BPDUs received on this port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.161.1.13.1.12
fsPvrstPortInvalidTcnBpduRxCount
Number of invalid TCN BPDUs received on this port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.161.1.13.1.13
fsPvrstPortRowStatus
This object is used to create or delete interfaces at PVRST module level. Ports can be created at PVRST module level only for ports that have been created in interface manager. Th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2076.161.1.13.1.14
fsPvrstPortLoopGuard
A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to receive information throu…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.15
fsPvrstPortLoopInconsistentState
A Boolean value set when the non-designated port on expiry of received information while timer transitions to Designated/Discarding state when the superior BPDU's are not receive…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.16
fsPvrstPortEnableBPDURx
This object is Boolean value set by the management. The BPDUs received on the port are ignored when this object is set to False.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.17
fsPvrstPortEnableBPDUTx
This object is a Boolean value set by the management. The BPDUs received on the port are not transmitted when this object is set to False.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.18
fsPvrstBpduFilter
This object configures the BPDU filter in PVSTP mode. Enable - Enables BPDU Filter feature on the port. When enabled on a port, BPDU Tx/Rx is disabled on the specified …
columnEnumeration.1.3.6.1.4.1.2076.161.1.13.1.19
fsPvrstPortAdminEdgeStatus
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.2
fsPvrstPortAutoEdge
TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.20
fsPvrstPortBpduInconsistentState
This object indicates that the port state changes to disabled / discarding due to the BPDU guard feature enabled on the port and the port receives BPDU on this. When set to TRUE, …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.21
fsPvrstPortTypeInconsistentState
This object indicates the port state changes to disabled / discarding due to the PVRST tagged packet reception on an access port. When set to TRUE, the state of this port is move…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.22
fsPvrstPortPVIDInconsistentState
A Boolean value set indicates the port state goes to disabled / discarding due to reception of tagged PVRST BPDU on its native VLAN(native VLAN PVRST packet is always untagged). W…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.23
fsPvrstPortBpduGuardAction
This object specifies the action to be taken when BPDU is received on a BPDU guard enabled port. When action is set as admin down error recovery time will be set as…
columnEnumeration.1.3.6.1.4.1.2076.161.1.13.1.24
fsPvrstPortRcvInfoWhileExpCount
This object specifies the number of times the info received while timer is expired on this port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.161.1.13.1.25
fsPvrstPortRcvInfoWhileExpTimeStamp
This object specifies the time stamp(in hundredths of a second) of the received info while timer is expired on this port last time.
columncenti-seconds SNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.161.1.13.1.26
fsPvrstPortImpStateOccurCount
This object specifies the number of times impossible state has occurred on this port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.161.1.13.1.27
fsPvrstPortImpStateOccurTimeStamp
This object specifies the time stamp(in hundredths of a second) of the impossible state that has occurred on this port last time.
columncenti-seconds SNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.161.1.13.1.28
fsPvrstPortErrorRecovery
This object specifies the amount of time to bring the interface out of the error-disabled (err-disabled) state. The range is from 30 to 65535 seconds.
columncenti-seconds Integer32.1.3.6.1.4.1.2076.161.1.13.1.29
fsPvrstPortOperEdgePortStatus
The operational value of the Edge Port parameter. The object is initialized to the value of fsPvrstPortAdminEdgeStatus and is set FALSE on reception of a BPDU.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.3
fsPvrstPortEnabledStatus
The administrative value for the port to configure PVRST enable/disable on this port By default, PVRST is enabled on each port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.5
fsPvrstRootGuard
The administrative value for the root guard is configurable on this Port. By default, it is False(2) & can be configured True(1).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.161.1.13.1.6
fsPvrstBpduGuard
This configures the BPDU guard feature on this port and has higher priority over Global BPDU guard. Enable - prevents temporary loops and applicable to ports and moves the port t…
columnEnumeration.1.3.6.1.4.1.2076.161.1.13.1.7
fsPvrstEncapType
The administrative value for the encapsulation type on the port. On Access Port, the encapsulation type will be DOT1q & is unchangeable. Only on Trunk ports it is changeable.
columnEnumeration.1.3.6.1.4.1.2076.161.1.13.1.8
fsPvrstPortAdminPointToPoint
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected …
columnEnumeration.1.3.6.1.4.1.2076.161.1.13.1.9