fsPvrstBpduGuard
ARICENT-PVRST-MIB ·
.1.3.6.1.4.1.2076.161.1.13.1.7
Object
column
r/w
Enumeration
This configures the BPDU guard feature on this port and has higher priority over Global BPDU guard.
Enable - prevents temporary loops and applicable to ports and
moves the port to disabled discarding state when BPDU is received on this port.
Disable - Disables the BPDU guard feature and the port state will be maintained till it is manually made up.
None - removes the BPDU guard functionality on this port so that when Global BPDU guard
configuration will take effect if this port is edge port.
Context
- MIB
- ARICENT-PVRST-MIB
- OID
.1.3.6.1.4.1.2076.161.1.13.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsFuturePvrstPortEntry
- Table
- fsFuturePvrstPortTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPvrstPort Port Number for the Context. | column | Integer32 | .1.3.6.1.4.1.2076.161.1.13.1.1 |
| fsPvrstPortOperPointToPoint The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.10 |
| fsPvrstPortInvalidBpdusRcvd Number of invalid PVRST BPDUs received on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.161.1.13.1.11 |
| fsPvrstPortInvalidConfigBpduRxCount Number of invalid configuration BPDUs received on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.161.1.13.1.12 |
| fsPvrstPortInvalidTcnBpduRxCount Number of invalid TCN BPDUs received on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.161.1.13.1.13 |
| fsPvrstPortRowStatus This object is used to create or delete interfaces at PVRST module
level. Ports can be created at PVRST module level only for ports that
have been created in interface manager. Th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.161.1.13.1.14 |
| fsPvrstPortLoopGuard A Boolean value set by management. If TRUE, then it will not age out
the information even if the peer does not send information. If the port
continues to receive information throu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.15 |
| fsPvrstPortLoopInconsistentState A Boolean value set when the non-designated port on expiry of received information while timer
transitions to Designated/Discarding state when the superior BPDU's are not receive… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.16 |
| fsPvrstPortEnableBPDURx This object is Boolean value set by the management. The BPDUs received on the port
are ignored when this object is set to False. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.17 |
| fsPvrstPortEnableBPDUTx This object is a Boolean value set by the management. The BPDUs received on the port are
not transmitted when this object is set to False. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.18 |
| fsPvrstBpduFilter This object configures the BPDU filter in PVSTP mode.
Enable - Enables BPDU Filter feature on the port.
When enabled on a port, BPDU Tx/Rx is disabled on the specified … | column | Enumeration | .1.3.6.1.4.1.2076.161.1.13.1.19 |
| fsPvrstPortAdminEdgeStatus The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.2 |
| fsPvrstPortAutoEdge TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.20 |
| fsPvrstPortBpduInconsistentState This object indicates that the port state changes to disabled / discarding
due to the BPDU guard feature enabled on the port and the port receives BPDU on this.
When set to TRUE, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.21 |
| fsPvrstPortTypeInconsistentState This object indicates the port state changes to disabled / discarding
due to the PVRST tagged packet reception on an access port. When set to
TRUE, the state of this port is move… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.22 |
| fsPvrstPortPVIDInconsistentState A Boolean value set indicates the port state goes to disabled / discarding
due to reception of tagged PVRST BPDU on its native VLAN(native VLAN PVRST packet
is always untagged). W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.23 |
| fsPvrstPortBpduGuardAction This object specifies the action to be taken when BPDU is received
on a BPDU guard enabled port.
When action is set as admin down error recovery time will be set as… | column | Enumeration | .1.3.6.1.4.1.2076.161.1.13.1.24 |
| fsPvrstPortRcvInfoWhileExpCount This object specifies the number of times the info received while timer is expired on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.161.1.13.1.25 |
| fsPvrstPortRcvInfoWhileExpTimeStamp This object specifies the time stamp(in hundredths of a second) of the received info while timer is expired on this port last time. | column | centi-seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.161.1.13.1.26 |
| fsPvrstPortImpStateOccurCount This object specifies the number of times impossible state has occurred on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.161.1.13.1.27 |
| fsPvrstPortImpStateOccurTimeStamp This object specifies the time stamp(in hundredths of a second) of the impossible state that has occurred on this port last time. | column | centi-seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.161.1.13.1.28 |
| fsPvrstPortErrorRecovery This object specifies the amount of time to bring the interface out of the
error-disabled (err-disabled) state.
The range is from 30 to 65535 seconds. | column | centi-seconds Integer32 | .1.3.6.1.4.1.2076.161.1.13.1.29 |
| fsPvrstPortOperEdgePortStatus The operational value of the Edge Port parameter. The
object is initialized to the value of
fsPvrstPortAdminEdgeStatus and is set FALSE on reception
of a BPDU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.3 |
| fsPvrstBridgeDetectionSemState Current state of the bridge detection state machine
of this port for all Spanning Tree context. | column | Enumeration | .1.3.6.1.4.1.2076.161.1.13.1.4 |
| fsPvrstPortEnabledStatus The administrative value for the port
to configure PVRST enable/disable on this port
By default, PVRST is enabled on each port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.5 |
| fsPvrstRootGuard The administrative value for the root guard
is configurable on this Port. By default, it is
False(2) & can be configured True(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.161.1.13.1.6 |
| fsPvrstEncapType The administrative value for the
encapsulation type on the port.
On Access Port, the encapsulation
type will be DOT1q & is unchangeable.
Only on Trunk ports it is changeable. | column | Enumeration | .1.3.6.1.4.1.2076.161.1.13.1.8 |
| fsPvrstPortAdminPointToPoint The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected … | column | Enumeration | .1.3.6.1.4.1.2076.161.1.13.1.9 |