fsPbbTraceInput
ARICENT-PROP-PBB-MIB ·
.1.3.6.1.4.1.29601.2.15.1.11
Object
scalar
r/w
OctetString
This object stores the trace option string input given by the user.
To enable particular trace, the user has to enter
the corresponding string(given below) assigned for that.
For enabling more than one traces, the user has to enter the
corresponding strings with SPACE delimiter between each string.
For example, to enable
- Init and Shutdown traces
- Management traces
The input string is,
enable init-shut mgmt
For example to disable
- Init and Shutdown traces
- Management traces
The input string is,
disable init-shut mgmt
first value should be either enable or disable.
The entered input string is parsed to get the trace options.
and the corresponding bits of the trace options are set in
fsPbbTraceOption object.
enable - Enables the corresponding option.
disable - Disables the corresponding option.
init-shut - Init and Shutdown traces
mgmt - Management traces
data - Data Path traces
ctrl - Control Plane traces
pkt-dump - Packet Dump traces
resource - Traces related to all
resources except buffers
all-fail - All Failure traces
buf - Buffer allocation/
release traces
critical - PBB Critical traces
redundancy - PBB Redundancy traces
- - Reserved
By default, critical trace is enabled.
Context
- MIB
- ARICENT-PROP-PBB-MIB
- OID
.1.3.6.1.4.1.29601.2.15.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsPbbSystem
- Siblings
- 11
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-288
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPbbShutdownStatus The administrative shutdown status requested by management for PBB
The value start(1) indicates that PBB is active in the bridge.
The value shutdown(2) indicates that PBB should… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.15.1.1 |
| fsPbbMaxCurrPortsPerISIDContext deprecated Max number of member ports that can be configured per ISID per context.
These include CBP and PIP member ports only.
This is a read-only object to show the scaling parameters
w… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.10 |
| fsPbbTraceOption This object is used to store the trace options that are enabled
by the user. The bit positions of the traces is shown below
Bit 0 - init-shut
Bit 1 - mgmt
Bit 2 - da… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.12 |
| fsPbbGlbOUI This is the value of global bridge wide OUI(Organization Unique Identifier).
This identifier is used by VIP and CBP to form the default destination address
in case OUI for an ISI… | scalar | OctetString | .1.3.6.1.4.1.29601.2.15.1.2 |
| fsPbbMaxNoOfISID deprecated Max number of ISID that the whole system can support.
The value set will be applied only after next reboot of the system.
The memory corresponding to this scaling
parameter is n… | scalar | Integer32 | .1.3.6.1.4.1.29601.2.15.1.3 |
| fsPbbMaxNoOfISIDPerContext deprecated Max number of ISID that can be configured per context.
The value set will be applied only after next reboot of the system.
The memory corresponding to this scaling
parameter is … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.4 |
| fsPbbMaxPortsPerISID deprecated Max number of member ports that can be configured per ISID .
These include CBP and PIP member ports only. For an I component,
max ports per ISID can be one(PIP) only while for a … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.5 |
| fsPbbMaxPortsPerISIDPerContext deprecated Max number of member ports that can be configured per ISID per context.
These include CBP and PIP member ports only. For an I component
max ports per ISID can be one(PIP) only wh… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.6 |
| fsPbbMaxCurrentNoOfISID deprecated Max number of ISID that the whole system can support.
This is a read-only object to show the scaling parameters
which is applied in the running system. This will be applicable
… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.7 |
| fsPbbMaxCurrentISIDPerContext deprecated Max number of ISID that can be configured per context.
This is a read-only object to show the scaling parameters
which is applied in the running system. This will be applicable … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.8 |
| fsPbbMaxCurrentPortsPerISID deprecated Max number of member ports per ISID. These include only CBPs and PIPs.
This is a read-only object to show the scaling parameters
which is applied in the running system. This will… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.15.1.9 |