fsPnacAuthFailEapol
ARICENT-PNAC-MIB ·
.1.3.6.1.4.1.2076.64.1.18
Object
Send EAPOL-Success on successful auth-fail Authorization.
Context
- MIB
- ARICENT-PNAC-MIB
- OID
.1.3.6.1.4.1.2076.64.1.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsPnacPaeSystem
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPnacSystemControl Starts or shutdowns PNAC module in the system.
When set as 'start', resources required by PNAC
module are allocated & PNAC module starts running.
When shutdo… | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.1 |
| fsPnacAttributeUsernameFormatGroupSeparator The MAC address group separator character used in the username attribute for MAB requests. | scalar | OctetString | .1.3.6.1.4.1.2076.64.1.10 |
| fsPnacAttributeUsernameFormatCase Whether hexadecimal characters used in the username attribute for MAB requests are
lowercase or uppercase. | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.11 |
| fsPnacAttributePasswordFormatGroupSize The size of the MAC address group used in the password attribute for MAB requests.
This object is ignored if the password override object is set. | scalar | Integer32 | .1.3.6.1.4.1.2076.64.1.12 |
| fsPnacAttributePasswordFormatGroupSeparator The MAC address group separator character used in the password attribute for MAB requests.
This object is ignored if the password override object is set. | scalar | OctetString | .1.3.6.1.4.1.2076.64.1.13 |
| fsPnacAttributePasswordFormatCase Whether hexadecimal characters used in the password attribute for MAB requests are
lowercase or uppercase. | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.14 |
| fsPnacAttributePasswordOverride This object is used to configure the value of the password attribute for MAB requests. | scalar | OctetString | .1.3.6.1.4.1.2076.64.1.15 |
| fsPnacAttributePasswordOverrideType This is used to indicate how the password override must be interpreted. | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.16 |
| fsPnacGuestVlanSupplicant Allow 802.1x supplicants in the guest vlan. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.64.1.17 |
| fsPnacTraceOption This object is used to enable trace statements in
Network Access Control Module.
A four byte integer is used for enabling the level of tracing.
Each bit in the four byt… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.64.1.2 |
| fsPnacAuthenticServer This object is used to configure for the choice of
local or remote authentication server to be used by
the authenticator for its authentication services. | scalar | AuthenticMethod | .1.3.6.1.4.1.2076.64.1.3 |
| fsPnacNasId This object is the Network Access Server Identifier
to be presented before the remote authentication
server. | scalar | OctetString | .1.3.6.1.4.1.2076.64.1.4 |
| fsPnacPaePortTable A table of system level information for each port
supported by the PNAC. An entry appears in this
table for each port of this system. This table is an
extension of dot1xPaePortTab… | table | - | .1.3.6.1.4.1.2076.64.1.5 |
| fsPnacModuleOperStatus This read only objects gives actual status of the PNAC module
(operational status of module). When module is enabled,
PNAC protocol starts functioning. When the module is disabled… | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.6 |
| fsPnacRemoteAuthServerType This object is used by the authenticator for its
authentication services, to configure the choice of
RADIUS or TACACS+ remote authentication servers when
the authentication method… | scalar | RemoteAuthServerType | .1.3.6.1.4.1.2076.64.1.7 |
| fsPnacAuthorizationServer This object is used to configure for the choice of
local or remote authorization server to be used by
the authenticator for its authorization services. | scalar | Enumeration | .1.3.6.1.4.1.2076.64.1.8 |
| fsPnacAttributeUsernameFormatGroupSize The size of the MAC address group used in the username attribute for MAB requests. | scalar | Integer32 | .1.3.6.1.4.1.2076.64.1.9 |