fsPimCmnHAAdminStatus
ARICENT-PIMCMN-MIB ·
.1.3.6.1.4.1.2076.111.1.1.19
Object
scalar
Enumeration
High Availability feature enabled or disabled in PIM.
Context
- MIB
- ARICENT-PIMCMN-MIB
- OID
.1.3.6.1.4.1.2076.111.1.1.19- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- futurePimCmnScalars
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPimCmnVersionString The version number of the PIM protocol in the router | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2076.111.1.1.1 |
| fsPimCmnGlobalDebug This is used to enable Debug statements in PIM.
A Four byte integer value is specified for enabling the
level of debugging. Each bit in the four byte integer
variable represents… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.10 |
| fsPimCmnPmbrStatus The border bit which identifies the router as a border router | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.11 |
| fsPimCmnRouterMode The Mode of the Pim-SM router (ssm_only or sm_ssm ) | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.12 |
| fsPimCmnStaticRpEnabled The flag which indicating that static configuration of RP is
available | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.13 |
| fsPimCmnIpStatus The enabled status of IPv4 Multicast Routing by PIM on this router. | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.14 |
| fsPimCmnIpv6Status The enabled status of IPv6 Multicast Routing by PIM on this router. | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.15 |
| fsPimCmnSRProcessingStatus The value indicates the whether to process and forward
the state Refresh message | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.16 |
| fsPimCmnRefreshInterval The interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used on… | scalar | seconds Integer32 | .1.3.6.1.4.1.2076.111.1.1.17 |
| fsPimCmnSourceActiveInterval The Period of time after receiving a multicast message
a Originator router (Directly connected to source)
will continue to send State Refresh Message | scalar | seconds Unsigned32 | .1.3.6.1.4.1.2076.111.1.1.18 |
| fsPimCmnSPTGroupThreshold The threshold of data rate for any group when exceeded,
source specific counters are initiated for that particular group
It is based on number of bits per sec.
To initiate SPT swi… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.2 |
| fsPimCmnHAState Internal State of the PIM instance.
init(1) implies that the PIM instance is up, but is unaware
of the status of its peer.
activeStandbyUp(2) implies that the current PIM instanc… | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.20 |
| fsPimCmnHADynamicBulkUpdStatus Status of dynamic bulk update between active and
dynamic PIM instance.
notStarted(1): Dynamic Bulk Update has not yet been started.
inProgress(2): Dynamic Bulk Update is in Progre… | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.21 |
| fsPimCmnHAForwardingTblEntryCnt Number entries in the shadow table of active
PIM instance. | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.22 |
| fsPimCmnIpRpfVector The status of IPv4 Multicast RPF Vector Feature. | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.23 |
| fsPimCmnIpBidirPIMStatus The status of Bidir-PIM Feature.Enabling/Disabling this feature
is applicable for both PIMv4 and PIMv6 | scalar | Enumeration | .1.3.6.1.4.1.2076.111.1.1.24 |
| fsPimCmnIpBidirOfferInterval The time interval between the DF election Offer messages to be sent. | scalar | milliseconds Integer32 | .1.3.6.1.4.1.2076.111.1.1.25 |
| fsPimCmnIpBidirOfferLimit The number of unanswered offers before the router changes as the
designated forwarder (DF) | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.26 |
| fsPimCmnSPTSourceThreshold The threshold of data rate for any source when exceeded,
switching to Shortest Path Tree is initiated.
It is based on number of bits per sec.
To switch to SPT, this threshold MUS… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.3 |
| fsPimCmnSPTSwitchingPeriod The period (in seconds)over which the data rate
is to be monitored for initiating source specific
counting or initiating switch to shortest path tree.
Same period is used for … | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.4 |
| fsPimCmnSPTRpThreshold The threshold at which the RP initiates switching to
Source specific shortest path.It is based on number
of registered packets received.
To switch to SPT, this threshold MUST be c… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.5 |
| fsPimCmnSPTRpSwitchingPeriod The period (in seconds) over which RP monitors
register packets for switching to the source specific
shortest path tree.
To switch to SPT, this period MUST be configured | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.6 |
| fsPimCmnRegStopRateLimitingPeriod The period (in seconds) over which RP monitors number of
register packets after sending the register stop message
to the source of the register message for rate limiting the
sendi… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.7 |
| fsPimCmnMemoryAllocFailCount This counter holds the number of memory allocation failures | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.111.1.1.8 |
| fsPimCmnGlobalTrace This is used to enable Trace Statements in PIM Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represen… | scalar | Integer32 | .1.3.6.1.4.1.2076.111.1.1.9 |