fsPimCmnContextExtSourceActiveInterval

ARICENT-PIMCMN-MIB · .1.3.6.1.4.1.2076.111.1.2.15.1.17

Object

column r/w seconds Unsigned32

The period of time after receiving a multicast message a 
Originator router (directly connected to source) will 
continue to send State Refresh Message

Context

MIB: ARICENT-PIMCMN-MIB
OID: .1.3.6.1.4.1.2076.111.1.2.15.1.17
Type: column
Access: readwrite
Status: current
Units: seconds
Parent: fsPimCmnContextExtEntry
Table: fsPimCmnContextExtTable
Siblings: 23

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints

range: 120-210

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsPimCmnContextExtContextId Context ID for this table entry	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.1`
fsPimCmnContextExtPmbrStatus The border bit which identifies the router as a border router	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.10`
fsPimCmnContextExtRouterMode The mode of the PIM-SM router (ssm_only or sm_ssm )	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.11`
fsPimCmnContextExtStaticRpEnabled The flag indicating that static configuration of RP is available	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.12`
fsPimCmnContextExtIpStatus The enabled status of IPv4 Multicast Routing by PIM on this router	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.13`
fsPimCmnContextExtIpv6Status The enabled status of IPv6 Multicast Routing by PIM on this router.	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.14`
fsPimCmnContextExtSRProcessingStatus Indicates whether to process and forward the state Refresh message	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.15`
fsPimCmnContextExtRefreshInterval The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used o…	column	seconds Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.16`
fsPimCmnContextExtIpRpfVector The status of IPv4 Multicast RPF Vector feature	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.18`
fsPimCmnContextExtIpBidirPIMStatus The status of Bidir-PIM Feature. Enabling/Disabling this feature is applicable for both PIMv4 and PIMv6	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.19`
fsPimCmnContextExtJoinPruneInterval The default interval at which periodic PIM Join/Prune messages are to be sent	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.111.1.2.15.1.2`
fsPimCmnContextExtIpBidirOfferInterval The time interval between the DF Election Offer messages to be sent	column	milliseconds Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.20`
fsPimCmnContextExtIpBidirOfferLimit The number of unanswered offers before the router changes as the designated forwarder (DF)	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.21`
fsPimCmnContextExtStatus The status of Multicast Routing by PIM on this router	column	Enumeration	`.1.3.6.1.4.1.2076.111.1.2.15.1.22`
fsPimCmnContextExtIpMaxRouteCnt Maximum IP route count	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.111.1.2.15.1.23`
fsPimCmnContextExtIpCurrRouteCnt Current IP route count	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.111.1.2.15.1.24`
fsPimCmnContextExtVersionString The version number of the PIM protocol in the router	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.2076.111.1.2.15.1.3`
fsPimCmnContextExtSPTGroupThreshold The threshold of data rate for any group when exceeded, source specific counters are initiated for that particular group. It is based on number of bits per sec. To initiate SPT…	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.4`
fsPimCmnContextExtSPTSourceThreshold The threshold of data rate for any source when exceeded, switching to Shortest Path Tree is initiated. It is based on number of bits per sec. To switch to SPT, this threshold MU…	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.5`
fsPimCmnContextExtSPTSwitchingPeriod The period (in seconds) over which the data rate is to be monitored for initiating source specific counting or initiating switch to shortest path tree. Same period is used for mon…	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.6`
fsPimCmnContextExtSPTRpThreshold The threshold at which the RP initiates switching to Source specific shortest path.It is based on number of registered packets received. To switch to SPT, this threshold MUST be …	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.7`
fsPimCmnContextExtSPTRpSwitchingPeriod The period (in seconds) over which RP monitors register packets for switching to the source specific shortest path tree. To switch to SPT, this period MUST be configured	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.8`
fsPimCmnContextExtRegStopRateLimitingPeriod The period (in seconds) over which RP monitors number of register packets after sending the register stop message to the source of the register message for rate limiting the sendi…	column	Integer32	`.1.3.6.1.4.1.2076.111.1.2.15.1.9`