fsPbRstCVlanBridgeMaxAge

ARICENT-PB-RSTP-MIB · .1.3.6.1.4.1.2076.123.1.2.1.5

MIB view Table view

Object

column BRIDGE-MIBTimeout

The value that all bridges use for MaxAge when this bridge is acting as
the root. Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of dot1dStpBridgeHelloTime. The
granularity of this timer is specified by 802.1D-1990 to be 1 second. An
agent may return a badValue error if a set is attempted to a value which is
not a whole number of seconds.

Context

MIB: ARICENT-PB-RSTP-MIB
OID: .1.3.6.1.4.1.2076.123.1.2.1.5
Type: column
Access: readonly
Status: current
Parent: fsPbRstCVlanBridgeEntry
Table: fsPbRstCVlanBridgeTable
Siblings: 13

Syntax

BRIDGE-MIBTimeout

Source: BRIDGE-MIBTimeout
Base type: Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsPbRstPort This object always indicates the port which is of type CEP. CEP port will be the index of the CVLAN Spanning tree.	column	Integer32	`.1.3.6.1.4.1.2076.123.1.2.1.1`
fsPbRstCVlanStpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this C-VLAN component on any port when it is the root of the spanning tree or trying to become so, in…	column	BRIDGE-MIBTimeout	`.1.3.6.1.4.1.2076.123.1.2.1.10`
fsPbRstCVlanStpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…	column	BRIDGE-MIBTimeout	`.1.3.6.1.4.1.2076.123.1.2.1.11`
fsPbRstCVlanStpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…	column	BRIDGE-MIBTimeout	`.1.3.6.1.4.1.2076.123.1.2.1.12`
fsPbRstCVlanStpTopChanges This object specifies the total number of topology changes detected by this bridge since the management entity was last reset or initialized.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.2076.123.1.2.1.13`
fsPbRstCVlanStpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.2076.123.1.2.1.14`
fsPbRstCVlanBridgeId The Bridge-Identifier as used in the Spanning Tree Protocol operation in the C-VLAN component to uniquely identify a bridge. Bridge Mac address field in this object will be the MA…	column	BRIDGE-MIBBridgeId	`.1.3.6.1.4.1.2076.123.1.2.1.2`
fsPbRstCVlanBridgeDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this C-VLAN component. This value is used as the Root Identifier…	column	BRIDGE-MIBBridgeId	`.1.3.6.1.4.1.2076.123.1.2.1.3`
fsPbRstCVlanBridgeRootCost The cost of the path to the root as seen from this C-VLAN component bridge.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.123.1.2.1.4`
fsPbRstCVlanBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return…	column	BRIDGE-MIBTimeout	`.1.3.6.1.4.1.2076.123.1.2.1.6`
fsPbRstCVlanBridgeHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this C-VLAN component, in units of hundredths of a…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.123.1.2.1.7`
fsPbRstCVlanBridgeForwardDelay The value that all bridges use for Forward Delay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value …	column	BRIDGE-MIBTimeout	`.1.3.6.1.4.1.2076.123.1.2.1.8`
fsPbRstCVlanBridgeTxHoldCount The value used by the Port Transmit state machine to limit the maximum transmission rate.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.123.1.2.1.9`