fsMIOspfRFC1583Compatibility
ARICENT-OSPFMI-MIB ·
.1.3.6.1.4.1.2076.145.1.3.1.5
Object
Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain those specified by RFC1583. When set to disabled the prference rules are those stated in RFC2178. Set to enabled by default.
Context
- MIB
- ARICENT-OSPFMI-MIB
- OID
.1.3.6.1.4.1.2076.145.1.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIOspfEntry
- Table
- fsMIOspfTable
- Siblings
- 27
Syntax
ARICENT-MISTDOSPF-MIBStatus
- Source
- ARICENT-MISTDOSPF-MIBStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIOspfOverFlowState Indicates whether router is in overflow state or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.1 |
| fsMIOspfTraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.145.1.3.1.12 |
| fsMIOspfMinLsaInterval The minimum time between distinct originations of any particular LSA. | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.13 |
| fsMIOspfABRType Different Types of ABRs supported | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.14 |
| fsMIOspfNssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.15 |
| fsMIOspfDefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.16 |
| fsMIOspfSpfHoldtime Minimum time between two consecutive SPF calculations in one ospf instances.
Time is configured in milli seconds | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.17 |
| fsMIOspfSpfDelay The Delay at which routing calculation is carried after a topology change in one ospf instance.
Time is configured in milli seconds | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.18 |
| fsMIOspfRestartSupport The router.s support for OSPF graceful restart.
Options include: no restart support, only planned
restarts, or both planned and unplanned restarts.
This object is p… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.19 |
| fsMIOspfPktsRcvd This gives the Total no. of Packets received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.2 |
| fsMIOspfRestartInterval Configured OSPF graceful restart timeout interval.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.20 |
| fsMIOspfRestartStrictLsaChecking Indicates if strict LSA checking is enabled for
graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
stora… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.21 |
| fsMIOspfRestartStatus Current status of OSPF graceful restart. | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.22 |
| fsMIOspfRestartAge Remaining time in current OSPF graceful restart
interval. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.145.1.3.1.23 |
| fsMIOspfRestartExitReason Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is curr… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.24 |
| fsMIOspfHelperSupport The router.s helper support for OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfHelperSupport is indicated by bitmap.
… | column | Bits | .1.3.6.1.4.1.2076.145.1.3.1.25 |
| fsMIOspfExtTraceLevel This object is used to define level of trace required for OSPF Ext.
Levels are defined as follows.
0x00000100 -- Restart Module.
0x00000200 -- Helper Module.
0x00000400 -- HA Mod… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.145.1.3.1.26 |
| fsMIOspfHelperGraceTimeLimit Configured OSPF graceful restart interval limit in helper side.
Time is configured in seconds
This object is persistent and when written the entity
SHOULD save the… | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.27 |
| fsMIOspfRestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when w… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.28 |
| fsMIOspfGraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.29 |
| fsMIOspfPktsTxed This gives the Total no. of Packets Transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.3 |
| fsMIOspfRestartReason The router.s restarter reason code of OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writte… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.30 |
| fsMIOspfRTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPF operations.Default value of
this object is equal to… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.145.1.3.1.31 |
| fsMIOspfRouterIdPermanence This variable displays the status of the ospfRouterId.
'dynamic' and 'permanent' refer to how the ospfRouterId
is derived. This object is used to save and restore the
ospf… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.32 |
| fsMIOspfBfdStatus This object is to enable/disable BFD feature in OSPF.By default is enabled.
If it is disabled OSPF will not register with BFD for neighbor IP path monitoring | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.33 |
| fsMIOspfBfdAllIfState This object is to enable/disable BFD for all OSPF interfaces
By default it is disabled. If it is enabled, OSPF will register
with BFD for neighbor IP path monitoring, when the OSP… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.34 |
| fsMIOspfPktsDisd This gives the Total no. of Packets Discarded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.4 |