fsMIOspfDefaultPassiveInterface

ARICENT-OSPFMI-MIB · .1.3.6.1.4.1.2076.145.1.3.1.16
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
When set to true all OSPF interfaces created after this
setting will be passive interfaces. 
If set to false OSPF interfaces created after this setting 
will not be passive.

Context

MIB
ARICENT-OSPFMI-MIB
OID
.1.3.6.1.4.1.2076.145.1.3.1.16
Type
column
Access
readwrite
Status
current
Parent
fsMIOspfEntry
Table
fsMIOspfTable
Siblings
27

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIOspfOverFlowState
Indicates whether router is in overflow state or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.145.1.3.1.1
fsMIOspfTraceLevel
This object is used to define level of trace required for OSPF. Levels are defined as follows. 0x00000100 -- Packet High Level Dump Trace. 0x00000200 -- Packet Low Level Dump Tra…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2076.145.1.3.1.12
fsMIOspfMinLsaInterval
The minimum time between distinct originations of any particular LSA.
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.13
fsMIOspfABRType
Different Types of ABRs supported
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.14
fsMIOspfNssaAsbrDefRtTrans
Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When set to enabled, P-…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.15
fsMIOspfSpfHoldtime
Minimum time between two consecutive SPF calculations in one ospf instances. Time is configured in milli seconds
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.17
fsMIOspfSpfDelay
The Delay at which routing calculation is carried after a topology change in one ospf instance. Time is configured in milli seconds
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.18
fsMIOspfRestartSupport
The router.s support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is p…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.19
fsMIOspfPktsRcvd
This gives the Total no. of Packets received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.145.1.3.1.2
fsMIOspfRestartInterval
Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.20
fsMIOspfRestartStrictLsaChecking
Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile stora…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.145.1.3.1.21
fsMIOspfRestartStatus
Current status of OSPF graceful restart.
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.22
fsMIOspfRestartAge
Remaining time in current OSPF graceful restart interval.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.145.1.3.1.23
fsMIOspfRestartExitReason
Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is curr…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.24
fsMIOspfHelperSupport
The router.s helper support for OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. fsMIOspfHelperSupport is indicated by bitmap. …
columnBits.1.3.6.1.4.1.2076.145.1.3.1.25
fsMIOspfExtTraceLevel
This object is used to define level of trace required for OSPF Ext. Levels are defined as follows. 0x00000100 -- Restart Module. 0x00000200 -- Helper Module. 0x00000400 -- HA Mod…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2076.145.1.3.1.26
fsMIOspfHelperGraceTimeLimit
Configured OSPF graceful restart interval limit in helper side. Time is configured in seconds This object is persistent and when written the entity SHOULD save the…
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.27
fsMIOspfRestartAckState
Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and when w…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.28
fsMIOspfGraceLsaRetransmitCount
Number of retransmissions for unacknowledged GraceLSAs
columnInteger32.1.3.6.1.4.1.2076.145.1.3.1.29
fsMIOspfPktsTxed
This gives the Total no. of Packets Transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.145.1.3.1.3
fsMIOspfRestartReason
The router.s restarter reason code of OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persistent and when writte…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.30
fsMIOspfRTStaggeringInterval
This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPF operations.Default value of this object is equal to…
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.145.1.3.1.31
fsMIOspfRouterIdPermanence
This variable displays the status of the ospfRouterId. 'dynamic' and 'permanent' refer to how the ospfRouterId is derived. This object is used to save and restore the ospf…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.32
fsMIOspfBfdStatus
This object is to enable/disable BFD feature in OSPF.By default is enabled. If it is disabled OSPF will not register with BFD for neighbor IP path monitoring
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.33
fsMIOspfBfdAllIfState
This object is to enable/disable BFD for all OSPF interfaces By default it is disabled. If it is enabled, OSPF will register with BFD for neighbor IP path monitoring, when the OSP…
columnEnumeration.1.3.6.1.4.1.2076.145.1.3.1.34
fsMIOspfPktsDisd
This gives the Total no. of Packets Discarded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.145.1.3.1.4
fsMIOspfRFC1583Compatibility
Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain those specified by …
columnARICENT-MISTDOSPF-MIBStatus.1.3.6.1.4.1.2076.145.1.3.1.5