fsMIOspfBfdStatus
ARICENT-OSPFMI-MIB ·
.1.3.6.1.4.1.2076.145.1.3.1.33
Object
column
r/w
Enumeration
This object is to enable/disable BFD feature in OSPF.By default is enabled. If it is disabled OSPF will not register with BFD for neighbor IP path monitoring
Context
- MIB
- ARICENT-OSPFMI-MIB
- OID
.1.3.6.1.4.1.2076.145.1.3.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIOspfEntry
- Table
- fsMIOspfTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIOspfOverFlowState Indicates whether router is in overflow state or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.1 |
| fsMIOspfTraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.145.1.3.1.12 |
| fsMIOspfMinLsaInterval The minimum time between distinct originations of any particular LSA. | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.13 |
| fsMIOspfABRType Different Types of ABRs supported | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.14 |
| fsMIOspfNssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.15 |
| fsMIOspfDefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.16 |
| fsMIOspfSpfHoldtime Minimum time between two consecutive SPF calculations in one ospf instances.
Time is configured in milli seconds | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.17 |
| fsMIOspfSpfDelay The Delay at which routing calculation is carried after a topology change in one ospf instance.
Time is configured in milli seconds | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.18 |
| fsMIOspfRestartSupport The router.s support for OSPF graceful restart.
Options include: no restart support, only planned
restarts, or both planned and unplanned restarts.
This object is p… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.19 |
| fsMIOspfPktsRcvd This gives the Total no. of Packets received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.2 |
| fsMIOspfRestartInterval Configured OSPF graceful restart timeout interval.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.20 |
| fsMIOspfRestartStrictLsaChecking Indicates if strict LSA checking is enabled for
graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
stora… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.145.1.3.1.21 |
| fsMIOspfRestartStatus Current status of OSPF graceful restart. | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.22 |
| fsMIOspfRestartAge Remaining time in current OSPF graceful restart
interval. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.145.1.3.1.23 |
| fsMIOspfRestartExitReason Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is curr… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.24 |
| fsMIOspfHelperSupport The router.s helper support for OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfHelperSupport is indicated by bitmap.
… | column | Bits | .1.3.6.1.4.1.2076.145.1.3.1.25 |
| fsMIOspfExtTraceLevel This object is used to define level of trace required for OSPF Ext.
Levels are defined as follows.
0x00000100 -- Restart Module.
0x00000200 -- Helper Module.
0x00000400 -- HA Mod… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.145.1.3.1.26 |
| fsMIOspfHelperGraceTimeLimit Configured OSPF graceful restart interval limit in helper side.
Time is configured in seconds
This object is persistent and when written the entity
SHOULD save the… | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.27 |
| fsMIOspfRestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when w… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.28 |
| fsMIOspfGraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | column | Integer32 | .1.3.6.1.4.1.2076.145.1.3.1.29 |
| fsMIOspfPktsTxed This gives the Total no. of Packets Transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.3 |
| fsMIOspfRestartReason The router.s restarter reason code of OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writte… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.30 |
| fsMIOspfRTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPF operations.Default value of
this object is equal to… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.145.1.3.1.31 |
| fsMIOspfRouterIdPermanence This variable displays the status of the ospfRouterId.
'dynamic' and 'permanent' refer to how the ospfRouterId
is derived. This object is used to save and restore the
ospf… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.32 |
| fsMIOspfBfdAllIfState This object is to enable/disable BFD for all OSPF interfaces
By default it is disabled. If it is enabled, OSPF will register
with BFD for neighbor IP path monitoring, when the OSP… | column | Enumeration | .1.3.6.1.4.1.2076.145.1.3.1.34 |
| fsMIOspfPktsDisd This gives the Total no. of Packets Discarded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.145.1.3.1.4 |
| fsMIOspfRFC1583Compatibility Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination.
When set to enabled, the preference rules remain those specified
by … | column | ARICENT-MISTDOSPF-MIBStatus | .1.3.6.1.4.1.2076.145.1.3.1.5 |