fsMsdpCacheLifetime

ARICENT-MSDP-MIB · .1.3.6.1.4.1.29601.2.61.1.4
MIB view Table view

Object

scalar r/w SNMPv2-SMITimeTicks 
The lifetime given to SA cache entries when created or
refreshed.  This is the [SG-State-Period] in the MSDP
spec.  A value of 0 means no SA caching is done by this
MSDP speaker.
          
This object does not measure time per se; instead, it
is the delta from the time at which an SA message is
received at which it should be expired if not refreshed.
(i.e., it is the value of fsMsdpSACacheExpiryTime
immediately after receiving an SA message applying to
that row.)  As such, TimeInterval would be a more
appropriate SYNTAX; it remains TimeTicks for backwards
compatibility.

Context

MIB
ARICENT-MSDP-MIB
OID
.1.3.6.1.4.1.29601.2.61.1.4
Type
scalar
Access
readwrite
Status
current
Parent
fsMsdp
Siblings
17

Syntax

SNMPv2-SMITimeTicks
Source
SNMPv2-SMITimeTicks
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMsdpTrapsnode-.1.3.6.1.4.1.29601.2.61.1.0
fsMsdpTraceLevel
This is used to enable Trace Statements in MSDP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represe…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29601.2.61.1.1
fsMsdpPeerCount
This indicates the number of configured Peers.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29601.2.61.1.10
fsMsdpPeerTable
The (conceptual) table listing the MSDP speaker's peers. This table is common for IPv4 and IPv6 Peers
table-.1.3.6.1.4.1.29601.2.61.1.11
fsMsdpSACacheTable
The (conceptual) table listing the MSDP SA advertisements currently in the MSDP speaker's cache.
table-.1.3.6.1.4.1.29601.2.61.1.12
fsMsdpMeshGroupTable
The (conceptual) table listing MSDP Mesh Group configuration.
table-.1.3.6.1.4.1.29601.2.61.1.13
fsMsdpRPTable
The (conceptual) table listing MSDP RP Address configurations. This address is used MSDP SA messages as a Initiator RP.
table-.1.3.6.1.4.1.29601.2.61.1.14
fsMsdpPeerFilterTable
The (conceptual) table listing MSDP Peer filtering configurations. The Peer connections can be accepted or denied based on this filter configuration.
table-.1.3.6.1.4.1.29601.2.61.1.15
fsMsdpSARedistributionTable
The (conceptual) table listing MSDP SA filtering configurations.
table-.1.3.6.1.4.1.29601.2.61.1.16
fsMsdpRtrId
The MIB object fsMsdpRtrId,is the configured Router-Id for the router.This ID is obtained from IP module
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.29601.2.61.1.17
fsMsdpIPv4AdminStat
The state of IPv4 MSDP on this MSDP speaker- globally enabled or disabled. By default MSDP for IPv4 is disabled
scalarEnumeration.1.3.6.1.4.1.29601.2.61.1.2
fsMsdpIPv6AdminStat
The state of IPv6 MSDP on this MSDP speaker - globally enabled or disabled. By default MSDP for IPv6 is disabled
scalarEnumeration.1.3.6.1.4.1.29601.2.61.1.3
fsMsdpNumSACacheEntries
The total number of entries in the SA Cache table of MSDP.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.29601.2.61.1.5
fsMsdpMaxPeerSessions
It defines the Maximum number of MSDP Peer sessions (TCP sessions) that would be allowed simultaneously.
scalarInteger32.1.3.6.1.4.1.29601.2.61.1.6
fsMsdpMappingComponentId
It indicates the MRP(PIM) component on which the MSDP should work. ie. Whenever the (*,G) Join is received in the configured PIM compoment and MSDP is enabled, SA cache entry wil…
scalarInteger32.1.3.6.1.4.1.29601.2.61.1.7
fsMsdpListenerPort
MSDP listens on this port for the TCP connection between the remote peers. This port change will be effective for the forthcoming connections, however the old Peers with old TCP …
scalarInteger32.1.3.6.1.4.1.29601.2.61.1.8
fsMsdpPeerFilter
This is the status of peer filter globally configured. This can be Accept all peers or Deny all Peers. If the status is acceptall, all the Peer connections are accepted if no rou…
scalarEnumeration.1.3.6.1.4.1.29601.2.61.1.9