fsMplsRsvpTeReoptLinkMaintenance
ARICENT-MPLS-RSVP-TE-MIB ·
.1.3.6.1.4.1.2076.13.2.2.37
Object
This object is introduced in support of Reoptimization of LSP, It is used to provide support for Link Maintenance of LSP Reoptimization using SNMP. Concept of Manual Trigger is mentioned in RFC 4736.
Context
- MIB
- ARICENT-MPLS-RSVP-TE-MIB
- OID
.1.3.6.1.4.1.2076.13.2.2.37- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMplsRsvpTeGenObjects
- Siblings
- 37
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsRsvpTeLsrID The LSR's Identifier. This value will be filled in the
Extended Tunnel Id field of a Session Object. | scalar | MplsLsrIdentifier | .1.3.6.1.4.1.2076.13.2.2.1 |
| fsMplsRsvpTeRRCapable This value specifies whether the node is RR-Capable or not.
Value enabled means this node is RR capable and when
fsMplsRsvpTeOperStatus is made up, memory for structures
associate… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.10 |
| fsMplsRsvpTeMsgIdCapable This value specifies whether the node is Capable of handling
and generating message ids. When fsMplsRsvpTeRRCapable is
enabled, by default this will be enabled.
Value enabled mean… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.11 |
| fsMplsRsvpTeRMDPolicyObject This value specifies the messages for which ack desired flag
needs to be set. Is valid only when fsMplsRsvpTeMsgIdCapable
is enabled. Refresh Messages are not taken into account.
… | scalar | Bits | .1.3.6.1.4.1.2076.13.2.2.12 |
| fsMplsRsvpTeGenLblSpaceMinLbl The Minimum value of the label that is associated with the
Generic label space. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.13 |
| fsMplsRsvpTeGenLblSpaceMaxLbl The Maximum value of the label that is associated with the
Generic label space. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.14 |
| fsMplsRsvpTeGenDebugFlag This is a 4-byte (32-bit) object with each bit enabling/
disabling the debug message.
Five most significant nibbles correspond to the routine identity
and the three least signific… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.13.2.2.15 |
| fsMplsRsvpTeGenPduDumpLevel This is a 4-byte (32-bit) object with each bit enabling/
disabling the level of Dump messages.
The dump messages can be enabled selectively with respective
to the level, the follo… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.16 |
| fsMplsRsvpTeGenPduDumpMsgType This is a 4-byte (32-bit) object with each bit enabling/
disabling dump of a particular type of message.
In the following patterns the bit set to 1 is the
bit corresponding to t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.17 |
| fsMplsRsvpTeGenPduDumpDirection This is a 4-byte (32-bit) object with a particular pair of two bits
represents the type of Dump message.
The message direction can be set as incoming, outgoing and all with the … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.18 |
| fsMplsRsvpTeOperStatus Field indicates the status of the RSVP-TE functionality
When the value is set to UP, required memory will be allocated
and RSVPTE functionality will be started. When made down f… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.19 |
| fsMplsRsvpTeMaxTnls The maximum number of TE tunnels supported. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.2 |
| fsMplsRsvpTeOverRideOption When the value is set to TRUE in an LSR, The LSR interprets
a Path Message with out a Diff-serv object as a request for an
Lsp with such non-Diff-Serv Quality of Service. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.13.2.2.20 |
| fsMplsRsvpTeMinTnlsWithMsgId Min number of Tunnels that carry a message id. | scalar | Unsigned32 | .1.3.6.1.4.1.2076.13.2.2.21 |
| fsMplsRsvpTeNotificationEnabled This object indicates whether Notification on Data Plane failure
is enabled or not. Default Value is enable(1). | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.22 |
| fsMplsRsvpTeNotifyMsgRetransmitIntvl This object indicates the retransmission interval in milli-seconds
for a Notify Message. | scalar | Unsigned32 | .1.3.6.1.4.1.2076.13.2.2.23 |
| fsMplsRsvpTeNotifyMsgRetransmitDecay This object indicates the percentage increase in the
retransmission interval during retransmission of Notify message
when ACK is not received. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.13.2.2.24 |
| fsMplsRsvpTeNotifyMsgRetransmitLimit This object indicates the maximum number of times a Notify message
will be retransmitted when ACK is not received. | scalar | Unsigned32 | .1.3.6.1.4.1.2076.13.2.2.25 |
| fsMplsRsvpTeAdminStatusTimeIntvl This object indicates the time interval in seconds for which a
node will wait to trigger the PathTear Message if the reflected
Resv Message is not received. | scalar | Unsigned32 | .1.3.6.1.4.1.2076.13.2.2.26 |
| fsMplsRsvpTePathStateRemovedSupport This object indicates whether Path State Removal feature is
supported or not when a PathErr is received. Value 'enable(1)'
indicates this feature is supported. Value 'disable(2)' … | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.27 |
| fsMplsRsvpTeLabelSetEnabled This object indicates whether this node is capable of sending
Label Set Object in Path message. Default value is 'disable(2)'. | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.28 |
| fsMplsRsvpTeAdminStatusCapability This object indicates whether this node is capable of processing
and sending Admin status object in Path message. Default value
is 'false(2)'. | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.29 |
| fsMplsRsvpTeMaxErhopsPerTnl The maximum number of ER-Hops that can be supported in a
tunnel. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.3 |
| fsMplsRsvpTeGrCapability This object is used to enable or disable Graceful Restart
support and Helper support for RSVPTE
none (1)- GR is not supported (Default value)
full (2)- GR is fully supported
helpe… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.2.2.30 |
| fsMplsRsvpTeGrRecoveryPathCapability This object is used to enable RecoveryPath message capability.
recoveryPathReceive bit indicates that the node desire to receive the
RecoveryPath message.
… | scalar | Bits | .1.3.6.1.4.1.2076.13.2.2.31 |
| fsMplsRsvpTeGrRestartTime This value specifies the restart time interval for the Graceful
restart of RSVP-TE component in seconds.
The default value is 120 seconds.
The acceptable range of values is 60 to… | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.32 |
| fsMplsRsvpTeGrRecoveryTime This value specifies the recovery time interval for the Graceful
restart of RSVP-TE component, after restart in seconds.
The default value is 120 seconds.
The acceptable range o… | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.33 |
| fsMplsRsvpTeGrProgressStatus This object denotes the current State of the Node's GR Progress.
Following are the different State of GR in the Node.
1. Not started.
2. GR shutdown in progress.
3. Restart in pro… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.34 |
| fsMplsRsvpTeReoptimizeTime This object is introduced in support of Reoptimization of LSP,
it is used to store the value of reoptimization time which is
discussed in RFC 4736.
The default value is 60 second… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.35 |
| fsMplsRsvpTeEroCacheTime This object is introduced in support of Reoptimization of LSP,
it is used to store the value ERO Cache time which is discussed
in RFC 4736.
The default value is 5 seconds.
The acc… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.36 |
| fsMplsRsvpTeReoptNodeMaintenance This object is introduced in support of Reoptimization of LSP,
It is used to provide support for Node Maintenance of LSP
Reoptimization using SNMP. Concept of Manual Trigger is me… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.2.2.38 |
| fsMplsRsvpTeMaxActRoutePerTnl The maximum number of Actual Routes that can be part of a
tunnel. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.4 |
| fsMplsRsvpTeMaxIfaces The maximum number of Interfaces supported by a router. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.5 |
| fsMplsRsvpTeMaxNbrs The maximum number of RSVP Neighbours supported by a router. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.6 |
| fsMplsRsvpTeSockSupprtd Indicates whether Socket based support is needed for the
Transmission of RSVP-TE PDU's. When set to 'true' all the outgoing
messages will be sent via raw socket/udp sockets.
Socke… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.13.2.2.7 |
| fsMplsRsvpTeHelloSupprtd Indicates whether Hello messages to be transmitted from this
node. When set to 'true' Hello messages will be sent from this
node. For sending the hello messages per interface we h… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.13.2.2.8 |
| fsMplsRsvpTeHelloIntervalTime This value specifies the time interval for the hello hold
timer in milli-seconds. | scalar | Integer32 | .1.3.6.1.4.1.2076.13.2.2.9 |