fsMIStdOspfIfPrefixSupressState
ARICENT-MISTDOSPF-MIB ·
.1.3.6.1.4.1.2076.146.6.1.22
Object
column
r/w
Enumeration
This object is to enable/disable Prefix Suppression in a specific OSPF interface. By default it is None. But when fsMIOspfIfPrefixSupressState is enabled/disabled, internally this object will be enabled/disabled for the interface which is having Point-to-Point
Context
- MIB
- ARICENT-MISTDOSPF-MIB
- OID
.1.3.6.1.4.1.2076.146.6.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIStdOspfIfEntry
- Table
- fsMIStdOspfIfTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIStdOspfIfIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.146.6.1.1 |
| fsMIStdOspfIfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello inte… | column | Integer32 | .1.3.6.1.4.1.2076.146.6.1.10 |
| fsMIStdOspfIfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor. | column | PositiveInteger | .1.3.6.1.4.1.2076.146.6.1.11 |
| fsMIStdOspfIfState The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.2076.146.6.1.12 |
| fsMIStdOspfIfDesignatedRouter The IP Address of the Designated Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.146.6.1.13 |
| fsMIStdOspfIfBackupDesignatedRouter The IP Address of the Backup Designated
Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.146.6.1.14 |
| fsMIStdOspfIfEvents The number of times this OSPF interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.146.6.1.15 |
| fsMIStdOspfIfAuthKey The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octet… | column | OctetString | .1.3.6.1.4.1.2076.146.6.1.16 |
| fsMIStdOspfIfStatus This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation depe… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.146.6.1.17 |
| fsMIStdOspfIfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is n… | column | Enumeration | .1.3.6.1.4.1.2076.146.6.1.18 |
| fsMIStdOspfIfDemand Indicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.146.6.1.19 |
| fsMIStdOspfAddressLessIf For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the correspondi… | column | Integer32 | .1.3.6.1.4.1.2076.146.6.1.2 |
| fsMIStdOspfIfAuthType The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally. | column | Integer32 | .1.3.6.1.4.1.2076.146.6.1.20 |
| fsMIStdOspfIfCryptoAuthType This specifies the cryptographic authentication algorithm to be
used. This can be configured only when fsMIStdOspfIfAuthType is
set to crypto. This object needs to be additionall… | column | Integer32 | .1.3.6.1.4.1.2076.146.6.1.21 |
| fsMIStdOspfIfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone. | column | AreaID | .1.3.6.1.4.1.2076.146.6.1.3 |
| fsMIStdOspfIfType The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 80… | column | Enumeration | .1.3.6.1.4.1.2076.146.6.1.4 |
| fsMIStdOspfIfAdminStat The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabl… | column | Status | .1.3.6.1.4.1.2076.146.6.1.5 |
| fsMIStdOspfIfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is… | column | DesignatedRouterPriority | .1.3.6.1.4.1.2076.146.6.1.6 |
| fsMIStdOspfIfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | UpToMaxAge | .1.3.6.1.4.1.2076.146.6.1.7 |
| fsMIStdOspfIfRetransInterval The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting databa… | column | UpToMaxAge | .1.3.6.1.4.1.2076.146.6.1.8 |
| fsMIStdOspfIfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network. | column | HelloRange | .1.3.6.1.4.1.2076.146.6.1.9 |