fsMIRip2IfConfOperState
ARICENT-MIRIP2-MIB ·
.1.3.6.1.4.1.2076.151.1.4.1.3
Object
column
Enumeration
This gives the Operational Status of the Interface
Context
- MIB
- ARICENT-MIRIP2-MIB
- OID
.1.3.6.1.4.1.2076.151.1.4.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIRip2IfConfEntry
- Table
- fsMIRip2IfConfTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | operup |
2 | operdown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIRip2IfConfAddress The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface i… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.151.1.4.1.1 |
| fsMIRip2IfConfInUseKey This represents the active authentication KeyID that is currently used
in the particular interface for sending RIP updates. | column | Integer32 | .1.3.6.1.4.1.2076.151.1.4.1.10 |
| fsMIRip2IfConfAuthLastKeyStatus A flag to indicate that the last key configured on a RIP interface
has expired or not.This object is updated during transmission and
reception of RIP updates.
TRU… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.151.1.4.1.11 |
| fsMIRip2IfAdminStat The administrative status of RIP-2 in the
router. The value 'enabled' denotes that the
RIP2 Process is active throughout the system.
'disabled' disables RIP2 Process in … | column | Enumeration | .1.3.6.1.4.1.2076.151.1.4.1.2 |
| fsMIRip2IfConfUpdateTmr Interval Time Between Updates | column | Integer32 | .1.3.6.1.4.1.2076.151.1.4.1.4 |
| fsMIRip2IfConfGarbgCollectTmr Interval before deleting an entry after not hearing
it. Also the advertisements of this entry is set to
INFINITY while sending to others | column | Integer32 | .1.3.6.1.4.1.2076.151.1.4.1.5 |
| fsMIRip2IfConfRouteAgeTmr Time after which the entry is put into garbage collect
interval | column | Integer32 | .1.3.6.1.4.1.2076.151.1.4.1.6 |
| fsMIRip2IfSplitHorizonStatus A flag to denote the split horizon operational status
in the system. The value `splitHorizon` denotes that
splitHorizon should be applied in the response packets
that are going out | column | Enumeration | .1.3.6.1.4.1.2076.151.1.4.1.7 |
| fsMIRip2IfConfDefRtInstall A flag that decides whether the default route received over this
interface should be installed to rip database or not. | column | Enumeration | .1.3.6.1.4.1.2076.151.1.4.1.8 |
| fsMIRip2IfConfSpacingTmr Number of route entries are greater than 25 , regular updates
(response packets are sent for every fsMIRip2IfConfUpdateTmr
interval) are sent in multiple packets.
Spacing Provid… | column | Integer32 | .1.3.6.1.4.1.2076.151.1.4.1.9 |