fsMIPbRstCVlanBridgeForwardDelay
ARICENT-MIPB-RSTP-MIB ·
.1.3.6.1.4.1.2076.134.1.2.1.8
Object
column
BRIDGE-MIBTimeout
This object specifies the value that all bridges use for ForwardDelay when this bridge is acting as the root.Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge.The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Context
- MIB
- ARICENT-MIPB-RSTP-MIB
- OID
.1.3.6.1.4.1.2076.134.1.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIPbRstCVlanBridgeEntry
- Table
- fsMIPbRstCVlanBridgeTable
- Siblings
- 14
Syntax
BRIDGE-MIBTimeout
- Source
- BRIDGE-MIBTimeout
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIPbRstPort This object specifies the port which is of type CEP. CEP port
will be the index of the CVLAN Spanning tree. | column | Integer32 | .1.3.6.1.4.1.2076.134.1.2.1.1 |
| fsMIPbRstCVlanStpHelloTime This object specifies the amount of time between the transmissions of
Configuration bridge PDUs by this C-VLAN component on any port when it
is the root of the spanning tree or tr… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.2076.134.1.2.1.10 |
| fsMIPbRstCVlanStpMaxAge This object specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded,
in units of hundredths of a second. This … | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.2076.134.1.2.1.11 |
| fsMIPbRstCVlanStpForwardDelay This object specifies the time value, measured in units of hundredths
of a second, controls how fast a port changes its spanning state when
moving towards the Forwarding state.The… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.2076.134.1.2.1.12 |
| fsMIPbRstCVlanStpTopChanges This object specifies the total number of topology changes detected by
this bridge since the management entity was last reset or initialized. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.134.1.2.1.13 |
| fsMIPbRstCVlanStpTimeSinceTopologyChange This object specifies the time (in hundredths of a second) since the last
time a topology change was detected by the bridge entity. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.134.1.2.1.14 |
| fsMIPbRstCVlanStpDebugOption This object is used to enable customer spanning-tree Debug Statements
in the STP Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT… | column | Integer32 | .1.3.6.1.4.1.2076.134.1.2.1.15 |
| fsMIPbRstCVlanBridgeId This object specifies the Bridge-Identifier as used in the Spanning
Tree Protocol operation in the C-VLAN component to uniquely identify
a bridge.Bridge Mac address field in this… | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2076.134.1.2.1.2 |
| fsMIPbRstCVlanBridgeDesignatedRoot This object specifies the bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol as executed by this
C-VLAN component. This value is used … | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.2076.134.1.2.1.3 |
| fsMIPbRstCVlanBridgeRootCost This object specifies the cost of the path to the root as seen from
this C-VLAN component bridge. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.134.1.2.1.4 |
| fsMIPbRstCVlanBridgeMaxAge This object specifies the value that all bridges use for MaxAge when
this bridge is acting as the root. Note that 802.1D-1990 specifies that
the range for this parameter is rela… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.2076.134.1.2.1.5 |
| fsMIPbRstCVlanBridgeHelloTime This object specifies the value that all bridges use for HelloTime when
this bridge is acting as the root. The granularity of this
timer is specified by 802.1D- 1990 to be 1 sec… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.2076.134.1.2.1.6 |
| fsMIPbRstCVlanBridgeHoldTime This object specifies the time value which determines the interval
length during which no more than two Configuration bridge PDUs shall be
transmitted by this C-VLAN component, in… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.134.1.2.1.7 |
| fsMIPbRstCVlanBridgeTxHoldCount This object specifies the value used by the Port Transmit state
machine to limit the maximum transmission rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.134.1.2.1.9 |