fsMIOspfv3HelperGraceTimeLimit
ARICENT-MIOSPFV3-MIB ·
.1.3.6.1.4.1.29601.2.24.2.1.11
Object
column
r/w
Integer32
Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's grace period received from grace LSA. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
Context
- MIB
- ARICENT-MIOSPFV3-MIB
- OID
.1.3.6.1.4.1.29601.2.24.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIOspfv3Entry
- Table
- fsMIOspfv3Table
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIOspfv3OverFlowState Indicates whether router is in overflow state or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.1 |
| fsMIOspfv3HelperSupport The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfv3HelperSupport is indicated by bitma… | column | Bits | .1.3.6.1.4.1.29601.2.24.2.1.10 |
| fsMIOspfv3RestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when wri… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.12 |
| fsMIOspfv3GraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.13 |
| fsMIOspfv3RestartReason The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writ… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.14 |
| fsMIOspfv3ExtTraceLevel This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000001 -- Restating router Trace.
0x00000002 -- Helper Trace. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.15 |
| fsMIOspfv3SetTraps This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status cha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.16 |
| fsMIOspfv3BfdStatus This object enables/disables BFD feature in OSPFv3.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.17 |
| fsMIOspfv3BfdAllIfState This object enables/disables BFD for all OSPFv3 interfaces.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring,
when the OSPFv3 neighbor state is FULL. Enabling… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.18 |
| fsMIOspfv3TraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.2 |
| fsMIOspfv3ABRType Different Types of ABRs supported | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.3 |
| fsMIOspfv3NssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.4 |
| fsMIOspfv3DefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.5 |
| fsMIOspfv3SpfDelay The Delay at which routing calculation is carried after a
topology change. | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.6 |
| fsMIOspfv3SpfHoldTime The minimum time between two consecutive SPF calculations. | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.7 |
| fsMIOspfv3RTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal t… | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.8 |
| fsMIOspfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.9 |