fsMIOspfv3BfdStatus
ARICENT-MIOSPFV3-MIB ·
.1.3.6.1.4.1.29601.2.24.2.1.17
Object
column
r/w
Enumeration
This object enables/disables BFD feature in OSPFv3. If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring
Context
- MIB
- ARICENT-MIOSPFV3-MIB
- OID
.1.3.6.1.4.1.29601.2.24.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIOspfv3Entry
- Table
- fsMIOspfv3Table
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIOspfv3OverFlowState Indicates whether router is in overflow state or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.1 |
| fsMIOspfv3HelperSupport The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfv3HelperSupport is indicated by bitma… | column | Bits | .1.3.6.1.4.1.29601.2.24.2.1.10 |
| fsMIOspfv3HelperGraceTimeLimit Configured OSPFv3 graceful restart interval limit in helper side.
Time is configured in seconds. If this object is set to 0, then the
helper accepts the restarting router's grac… | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.11 |
| fsMIOspfv3RestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when wri… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.12 |
| fsMIOspfv3GraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.13 |
| fsMIOspfv3RestartReason The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writ… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.14 |
| fsMIOspfv3ExtTraceLevel This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000001 -- Restating router Trace.
0x00000002 -- Helper Trace. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.15 |
| fsMIOspfv3SetTraps This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status cha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.16 |
| fsMIOspfv3BfdAllIfState This object enables/disables BFD for all OSPFv3 interfaces.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring,
when the OSPFv3 neighbor state is FULL. Enabling… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.18 |
| fsMIOspfv3TraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.24.2.1.2 |
| fsMIOspfv3ABRType Different Types of ABRs supported | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.3 |
| fsMIOspfv3NssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | column | Enumeration | .1.3.6.1.4.1.29601.2.24.2.1.4 |
| fsMIOspfv3DefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.5 |
| fsMIOspfv3SpfDelay The Delay at which routing calculation is carried after a
topology change. | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.6 |
| fsMIOspfv3SpfHoldTime The minimum time between two consecutive SPF calculations. | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.7 |
| fsMIOspfv3RTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal t… | column | Integer32 | .1.3.6.1.4.1.29601.2.24.2.1.8 |
| fsMIOspfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.24.2.1.9 |