fsMIIpv6SENDPrefixChk
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.1.1.16
Object
column
r/w
Enumeration
This object specifies the prefix and range check status in Secure Neighbor Discovery. When enabled it indicates prefix and range checks are relaxed in host. When disabled it indicates prefix and range checks are performed in host to verify that prefix advertised by router are in the range that it is certified to advertise
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIIpv6ContextEntry
- Table
- fsMIIpv6ContextTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6NdCacheMaxRetries This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability dete… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.1.1.1 |
| fsMIIpv6RFC5942Compatibility When the IPv6 node is configured to be RFC5942, ISS compatible
with RFC 5942 and prefix can be configured as on-link. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.10 |
| fsMIIpv6SENDSecLevel This Object specifies the sec level value for CGA generation in Secure Neighbor Discovery.
Note: For Sec values greater than zero, the above algorithm does not guaranty to termina… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.1.1.11 |
| fsMIIpv6SENDNbrSecLevel This object specifies the sec level that are accepted from neighbors in Secure Neighbor
Discovery.
Note: CGA verification should be able to process all security parameter values, … | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.1.1.12 |
| fsMIIpv6SENDAuthType This object specifies the authorization type to be used in Secure Neighbor Discovery. The options include;
0 indicates only CGA authorization is required.
1 indicates only TA auth… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.13 |
| fsMIIpv6SENDMinBits This object specifies the minimum acceptable key length.
Note: ISS supports only 512 and 1024 bits key. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.14 |
| fsMIIpv6SENDSecDAD This object specifies whether to accept the unsecured advertisements, when performing
DAD for Secure Neighbor Discovery in mixed mode. When enabled it implies that secured
adver… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.15 |
| fsMIIpv6PmtuConfigStatus Flag to enable or disable Path MTU Discovery for the node. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.2 |
| fsMIIpv6PmtuTimeOutInterval The time in minutes after which the path MTU entry times out. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.35.1.1.1.3 |
| fsMIIpv6JumboEnable Flag to enable or disable IPv6 Jumbogram facility for the node. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.4 |
| fsMIIpv6NumOfSendJumbo Number of IPv6 Jumbograms sent from the node. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.5 |
| fsMIIpv6NumOfRecvJumbo Number of IPv6 Jumbograms received. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.6 |
| fsMIIpv6ErrJumbo Number of IPv6 Error Jumbograms received or transmitted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.7 |
| fsMIIpv6ContextDebug Enables the tracing in the selected submodule in IP6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 1 - Management tr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.35.1.1.1.8 |
| fsMIIpv6RFC5095Compatibility When the IPv6 node is configured to be RFC5095 compatible,
then it should treat Type 0 Routing Header as invalid
routing header type. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.9 |