fsMIIpv6SENDNbrSecLevel
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.1.1.12
Object
column
r/w
Integer32
This object specifies the sec level that are accepted from neighbors in Secure Neighbor Discovery. Note: CGA verification should be able to process all security parameter values, since verification procedure is relatively faster compared to CGA Generation (RFC 3972 Section 5).
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIIpv6ContextEntry
- Table
- fsMIIpv6ContextTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6NdCacheMaxRetries This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability dete… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.1.1.1 |
| fsMIIpv6RFC5942Compatibility When the IPv6 node is configured to be RFC5942, ISS compatible
with RFC 5942 and prefix can be configured as on-link. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.10 |
| fsMIIpv6SENDSecLevel This Object specifies the sec level value for CGA generation in Secure Neighbor Discovery.
Note: For Sec values greater than zero, the above algorithm does not guaranty to termina… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.1.1.11 |
| fsMIIpv6SENDAuthType This object specifies the authorization type to be used in Secure Neighbor Discovery. The options include;
0 indicates only CGA authorization is required.
1 indicates only TA auth… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.13 |
| fsMIIpv6SENDMinBits This object specifies the minimum acceptable key length.
Note: ISS supports only 512 and 1024 bits key. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.14 |
| fsMIIpv6SENDSecDAD This object specifies whether to accept the unsecured advertisements, when performing
DAD for Secure Neighbor Discovery in mixed mode. When enabled it implies that secured
adver… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.15 |
| fsMIIpv6SENDPrefixChk This object specifies the prefix and range check status in Secure Neighbor Discovery.
When enabled it indicates prefix and range checks are relaxed in host. When disabled
it ind… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.16 |
| fsMIIpv6PmtuConfigStatus Flag to enable or disable Path MTU Discovery for the node. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.2 |
| fsMIIpv6PmtuTimeOutInterval The time in minutes after which the path MTU entry times out. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.35.1.1.1.3 |
| fsMIIpv6JumboEnable Flag to enable or disable IPv6 Jumbogram facility for the node. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.4 |
| fsMIIpv6NumOfSendJumbo Number of IPv6 Jumbograms sent from the node. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.5 |
| fsMIIpv6NumOfRecvJumbo Number of IPv6 Jumbograms received. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.6 |
| fsMIIpv6ErrJumbo Number of IPv6 Error Jumbograms received or transmitted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.1.1.7 |
| fsMIIpv6ContextDebug Enables the tracing in the selected submodule in IP6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 1 - Management tr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.35.1.1.1.8 |
| fsMIIpv6RFC5095Compatibility When the IPv6 node is configured to be RFC5095 compatible,
then it should treat Type 0 Routing Header as invalid
routing header type. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.1.1.9 |