fsMIIpv6NdCacheMaxRetries

ARICENT-MIIPV6-MIB · .1.3.6.1.4.1.29601.2.35.1.1.1.1

MIB view Table view

Object

column r/w Integer32

This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability detection.

Context

MIB: ARICENT-MIIPV6-MIB
OID: .1.3.6.1.4.1.29601.2.35.1.1.1.1
Type: column
Access: readwrite
Status: current
Parent: fsMIIpv6ContextEntry
Table: fsMIIpv6ContextTable
Siblings: 15

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-10

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMIIpv6RFC5942Compatibility When the IPv6 node is configured to be RFC5942, ISS compatible with RFC 5942 and prefix can be configured as on-link.	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.10`
fsMIIpv6SENDSecLevel This Object specifies the sec level value for CGA generation in Secure Neighbor Discovery. Note: For Sec values greater than zero, the above algorithm does not guaranty to termina…	column	Integer32	`.1.3.6.1.4.1.29601.2.35.1.1.1.11`
fsMIIpv6SENDNbrSecLevel This object specifies the sec level that are accepted from neighbors in Secure Neighbor Discovery. Note: CGA verification should be able to process all security parameter values, …	column	Integer32	`.1.3.6.1.4.1.29601.2.35.1.1.1.12`
fsMIIpv6SENDAuthType This object specifies the authorization type to be used in Secure Neighbor Discovery. The options include; 0 indicates only CGA authorization is required. 1 indicates only TA auth…	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.13`
fsMIIpv6SENDMinBits This object specifies the minimum acceptable key length. Note: ISS supports only 512 and 1024 bits key.	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.14`
fsMIIpv6SENDSecDAD This object specifies whether to accept the unsecured advertisements, when performing DAD for Secure Neighbor Discovery in mixed mode. When enabled it implies that secured adver…	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.15`
fsMIIpv6SENDPrefixChk This object specifies the prefix and range check status in Secure Neighbor Discovery. When enabled it indicates prefix and range checks are relaxed in host. When disabled it ind…	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.16`
fsMIIpv6PmtuConfigStatus Flag to enable or disable Path MTU Discovery for the node.	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.2`
fsMIIpv6PmtuTimeOutInterval The time in minutes after which the path MTU entry times out.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.35.1.1.1.3`
fsMIIpv6JumboEnable Flag to enable or disable IPv6 Jumbogram facility for the node.	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.4`
fsMIIpv6NumOfSendJumbo Number of IPv6 Jumbograms sent from the node.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.29601.2.35.1.1.1.5`
fsMIIpv6NumOfRecvJumbo Number of IPv6 Jumbograms received.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.29601.2.35.1.1.1.6`
fsMIIpv6ErrJumbo Number of IPv6 Error Jumbograms received or transmitted.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.29601.2.35.1.1.1.7`
fsMIIpv6ContextDebug Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 1 - Management tr…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.35.1.1.1.8`
fsMIIpv6RFC5095Compatibility When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type.	column	Enumeration	`.1.3.6.1.4.1.29601.2.35.1.1.1.9`