fsMIIpv6IfReachableTime
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.2.1.10
Object
column
r/w
Integer32
The reachable time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds that a neighboring node is considered to be reachable after having received the reachability confirmation from that node.
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIIpv6IfEntry
- Table
- fsMIIpv6IfTable
- Siblings
- 33
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6IfType The type of interface immediately `below' the network layer
in the protocol stack. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.1 |
| fsMIIpv6IfRetransmitTime The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted N… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.11 |
| fsMIIpv6IfDelayProbeTime The time in seconds to delay before starting unreachability
probing of neighbor entries which are stale. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.12 |
| fsMIIpv6IfPrefixAdvStatus The prefix advertisement status on this IPv6 interface.
Object value enabled(1) allows the configured prefixes to
be advertised in router advertisements. Otherwise, the prefixes
a… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.13 |
| fsMIIpv6IfMinRouterAdvTime The minimum time in seconds allowed between sending
unsolicited router advertisements.The default value is
one-third the default value of fsMIIpv6IfMaxRouterAdvTime.
The value can… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.2.1.14 |
| fsMIIpv6IfMaxRouterAdvTime The maximum time in seconds between sending unsolicited
router advertisements. Router advertisements are sent
periodically at a random interval between the values
specified by fsM… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.15 |
| fsMIIpv6IfDADRetries The maximum number of neighbor solicitations sent for
the purpose of duplicate address detection on a tentative
address. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.16 |
| fsMIIpv6IfForwarding This MIB object is used to configure IPv6 routing and forwarding on this interface.
The default value is set to enabled. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.17 |
| fsMIIpv6IfRoutingStatus This MIB object indicates the current routing status
on this interface. This is based on the global IPv6
forwarding status of the mib object 'ipv6Forwarding'.
If 'ipv6Forwarding' … | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.18 |
| fsMIIpv6IfIcmpErrInterval Time interval between tokens being added to the ICMPv6 token bucket. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.19 |
| fsMIIpv6IfPortNum This object identifies the 'interface' over which this
network interface operates and is dependent on the value of
fsMIIpv6IfType. This object reflects the ifindex value of
ifTabl… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.2 |
| fsMIIpv6IfIcmpTokenBucketSize Maximum number of tokens stored in the ICMPv6 bucket | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.20 |
| fsMIIpv6IfDestUnreachableMsg Indicates whether ICMPv6 destination unreachable messages are
enabled/disabled on this interface. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.21 |
| fsMIIpv6IfUnnumAssocIPIf This object stores the interface index of the interface associated
with the unnumbered interface. The source IPv6 addresses used over
the Unnumbered interface in relation to the d… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.29601.2.35.1.2.1.22 |
| fsMIIpv6IfRedirectMsg Indicates whether ICMPv6 redirect messages are
enabled/disabled on this interface. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.23 |
| fsMIIpv6IfAdvSrcLLAdr Indicates whether source IPv6 Advertisement Link Layer
address flag enabled/disabled on this interface for router advertisement. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.24 |
| fsMIIpv6IfAdvIntOpt Indicates whether IPv6 Advertisement Interval Option
flag enabled/disabled on this interface for router advertisement. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.25 |
| fsMIIpv6IfNDProxyAdminStatus This object is used to enable or disable Neighbor
Discovery (ND) Proxy Feature on the interface. | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.26 |
| fsMIIpv6IfNDProxyMode This Object is used to enable or disable Neighbor
Discovery (ND) Proxy feature in local subnet.
This object takes effect only when
ND Proxying is enabled on the interface.
When t… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.27 |
| fsMIIpv6IfNDProxyOperStatus This object specifies the current operational status
of Neighbor Discovery (ND) Proxy on this interface.
This object take effect only when ND Proxying is enabled
on the interface… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.28 |
| fsMIIpv6IfNDProxyUpStream This object specifies whether the interface is an
upstream or downstream Proxy interface. This object
takes effect only when ND Proxying is enabled on the
interface. When set to… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.35.1.2.1.29 |
| fsMIIpv6IfCircuitNum This object identifies the circuit over which this network
interface operates and is dependent on the value of
fsMIIpv6IfType. If the data-link layer is Ethernet, PPP or
IPv4 Tunn… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.2.1.3 |
| fsMIIpv6IfSENDSecStatus This object specifies the admin status of Secure Neighbor Discovery
feature in the interface. The options include;
1 enables SeND on the interface,
2 disables SeND on the interfa… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.30 |
| fsMIIpv6IfSENDDeltaTimestamp This object specifies the Delta timestamp value for the interface | column | Unsigned32 | .1.3.6.1.4.1.29601.2.35.1.2.1.31 |
| fsMIIpv6IfSENDFuzzTimestamp This object specifies the Fuzz timestamp value for the interface | column | Unsigned32 | .1.3.6.1.4.1.29601.2.35.1.2.1.32 |
| fsMIIpv6IfSENDDriftTimestamp This object specifies the Drift timestamp value for the interface | column | Unsigned32 | .1.3.6.1.4.1.29601.2.35.1.2.1.33 |
| fsMIIpv6IfDefRoutePreference This object specifies the default router preference value
advertised through RA for the interface | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.34 |
| fsMIIpv6IfToken The address token for this interface that is (at least)
unique on the link this interface is attached to. This token
can be specified only if the fsMIIpv6IfType is frame-relay(32… | column | OctetString | .1.3.6.1.4.1.29601.2.35.1.2.1.4 |
| fsMIIpv6IfOperStatus The operational state of interface. It is up(1) if the
fsMIStdIpv6InterfaceEnableStatus is 'up' and the layer
below the network layer is also operational.
Otherwise it is down(2). | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.5 |
| fsMIIpv6IfRouterAdvStatus The router advertisement status on this interface. When
the object is set to enabled(1), router advertisements can be
allowed on the IPv6 interface. Otherwise, router advertisemen… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.6 |
| fsMIIpv6IfRouterAdvFlags This object specifies the bits to be set in the router
advertisements sent by this entity on this interface.
M-bit set in the router advertisement indicates hosts
to configure an … | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.2.1.7 |
| fsMIIpv6IfHopLimit The Hop Limit value to be placed in the router advertisements
sent on this IPv6 interface. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.2.1.8 |
| fsMIIpv6IfDefRouterTime The default router time to be indicated in the router
advertisements sent on this IPv6 interface. This defines the
time in seconds for which this entity acts as the default
router… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.2.1.9 |