fsMIIpv6GlobalDebug
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.11
Object
Enables the tracing in the selected submodule in IP6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 3 - Control Plane trace.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
Different submodule Tracing -
BIT 24 - Tracing in IP6 module.
BIT 25 - Tracing in ICMP6 submodule.
BIT 26 - Tracing in ND6 submodule.
BIT 27 - Tracing in UDP6 submodule.
BIT 29 - Tracing in PING6 submodule.
The remaining bits are unused.The combination of levels and submodules
are allowed i.e. Tracing can be allowed at all failure and
control plane level in All submodules by setting the BIT appropriately.
For Example, setting the debug value to
00000001000000000000000001000000
will enable all failure trace prints in IP6 module.
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMIipv6
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6ContextTable This table contains the global configurations for IPv6 for each VR. | table | - | .1.3.6.1.4.1.29601.2.35.1.1 |
| fsMIIpv6PingTable This entity's IPv6 Ping Table. | table | - | .1.3.6.1.4.1.29601.2.35.1.10 |
| fsMIIpv6AddrSelPolicyTable This table is used for default address selection in IPv6. This table is used to configure the Precedence
and Label associated with a source/destination address. The Address Select… | table | - | .1.3.6.1.4.1.29601.2.35.1.12 |
| fsMIIpv6IfScopeZoneMapTable A zone index identifies an instance of a specific scope uniquely
within the system.The zone index is used to associate unambiguously
an IPv6 address to a specific zone.
… | table | - | .1.3.6.1.4.1.29601.2.35.1.13 |
| fsMIIpv6ScopeZoneTable The table is used to map each scope-zone index
with the interface to which it has been associated.
This table is indeed used while forwarding packets
to find out what all interf… | table | - | .1.3.6.1.4.1.29601.2.35.1.14 |
| fsMIIpv6RARouteInfoTable This table contains the information about the more specific route which
are advertised through route information option in router
advertisement message. | table | - | .1.3.6.1.4.1.29601.2.35.1.15 |
| fsMIIpv6IfTable The IPv6 Interface table contains information on the
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical
network l… | table | - | .1.3.6.1.4.1.29601.2.35.1.2 |
| fsMIIpv6IfStatsTable IPv6 interface traffic statistics | table | - | .1.3.6.1.4.1.29601.2.35.1.3 |
| fsMIIpv6AddrTable The table containing entity's IPv6 addressing information. | table | - | .1.3.6.1.4.1.29601.2.35.1.4 |
| fsMIIpv6AddrProfileTable The table containing information for an address or set of
addresses of the entity. | table | - | .1.3.6.1.4.1.29601.2.35.1.5 |
| fsMIIpv6IcmpStatsTable The table of ICMP counter statistics for each virtual router. | table | - | .1.3.6.1.4.1.29601.2.35.1.6 |
| fsMIIpv6PmtuTable IPv6 Path MTU table. This table contains
an entry for a specific path traversed by
packets exchanged between the source and
destination nodes. | table | - | .1.3.6.1.4.1.29601.2.35.1.7 |
| fsMIIpv6NDProxyListTable Configurable list of IPv6 Addresses for which
Proxy Neighbor Discovery is desired. | table | - | .1.3.6.1.4.1.29601.2.35.1.9 |