fsMIIpv6AddrOperStatus
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.4.1.6
Object
column
Enumeration
Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfaces on which Duplicate Address Detection is not performed, this object will take values only complete(2) and down(3).
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.4.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIIpv6AddrEntry
- Table
- fsMIIpv6AddrTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | tentative |
2 | complete |
3 | down |
4 | failed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6AddrAddress The IPv6 address to which this entry's addressing
information pertains. | column | OctetString | .1.3.6.1.4.1.29601.2.35.1.4.1.1 |
| fsMIIpv6AddrSENDCgaModifier This object stores the 128 bit modifier used for generating
cryptographically generated address (CGA).
Note: This object is defined as read-write object to enable it to be saved
a… | column | OctetString | .1.3.6.1.4.1.29601.2.35.1.4.1.10 |
| fsMIIpv6AddrSENDCollisionCount This object stores the collision count for Duplicate Address Detection (DAD).
Note: This object is defined as read-write object to enable it to be saved
and restored. Only read wr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.4.1.11 |
| fsMIIpv6AddrPrefixLen The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 … | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.2 |
| fsMIIpv6AddrAdminStatus Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.35.1.4.1.3 |
| fsMIIpv6AddrType Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local … | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.4.1.4 |
| fsMIIpv6AddrProfIndex Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this address. For a link-local address,
this objec… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.5 |
| fsMIIpv6AddrContextId Indicates the virtual router to which the IPv6 address is
applied. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.7 |
| fsMIIpv6AddrScope Scope is a 4-bit value that describes the scope of
an IPV6 address.An unicast address can possibly have 2
scopes (Linklocal and Global) only. A multicast address
can have a maxim… | column | INET-ADDRESS-MIBInetScopeType | .1.3.6.1.4.1.29601.2.35.1.4.1.8 |
| fsMIIpv6AddrSENDCgaStatus This object displays the CGA generation status.
When true, it indicates that the address is cryptographically generated address(CGA).
When false, it indicates that the address is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.35.1.4.1.9 |